Screws, 3x8mm countersunk machine (6) (hex drive) 3x8 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details
Servo connector, Y adapter (for dual-servo steering) The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-...
View full details
Carriers, stub axle (blue-anodized 6061-T6 aluminum)(rear)(2)
Maxx Performance Mini Maxx does what the others can’t, in a fast, fun, and compact form that’s instantly recognizable and engineered to a zero-co...
View full details
This is Traxxas Top Fuel model engine fuel, 20% Quart. Traxxas fuels are perfectly blended with high quality ingredients to give your engine easier...
View full details
Connector, power tap (with voltage sensor plug)/ wire tie/ 2.6x8 BCS (2) The power tap connector plugs inline between the battery and ESC to pro...
View full details
Heavy-Duty X-Maxx® Suspension Arm Heavy-duty X-Maxx lower suspension arms utilize our latest proprietary composite material for extreme durabilit...
View full details
The Traxxas Maxx Hardened Steel Suspension Pin Set is an optional upgrade that will improve the durability of the Traxxas Maxx Monster Truck. These...
View full details
The Traxxas Telemetry 2.0 Expander & 2.0 GPS Module Combo requires the TQi radio system with Wireless Module (TRA6511), TSM receiver (TRA6533),...
View full details
The Traxxas TRX-4 Chevrolet K5 Blazer delivers scale appearance and detail like never before. The new LED Light Kit (#8038) takes scale realism to...
View full details
Spur gear, 50-tooth (1.0 metric pitch) 50-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas...
View full details
Shock shafts, GTX, 110mm (assembled with rod ends & hollow balls) (steel, chrome finish) (2) Pair of replacement 110 mm steel shock shafts wit...
View full details
Shock tower, rear (left & right halves) Rear shock tower halves Replacement part for these models: X-Maxx® Ultimate X-Maxx®
This is a pair of upper suspension arms for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction for reduced weight F...
View full details
Traxxas 7635 LaTrax Bumper Front & Rear TetonThese are the Front and Rear Bumpers for the LaTrax Teton Monster Truck from Traxxas.FEATURESPlast...
View full details
Sold out
This is a replacement Traxxas Complete Slipper Clutch. Features:Factory Replacement Slipper Clutch Includes: (1) Slipper Clutch Hub (1) Clutch Pad...
View full details
Wheel hubs, splined, 17mm, short (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (Slas...
View full details
This is the clear LED lightbar in chrome for the Traxxas Stampede 4x4 VXL.Features: Four clear LED lights in chrome finish plastic housingsIncludes...
View full details
Half Shaft Set, Long (Plastic Parts Only) (Internal Splined Half Shaft/ External Splined Half Shaft/ Rubber Boot) (Assembled w/ Glued Boot) (2 Asse...
View full details
This is an optional Traxxas Center Driveshaft Set, and is intended for use with the Traxxas E-Revo and Summit trucks. Traxxas Steel Constant Veloci...
View full details
This is the Traxxas set of four Anodized 17mm Splined Wheel Hubs, (4). These Splined Wheel Hubs are red colored and compatible with the Traxxas Sla...
View full details
This is the steering arm mount for the Traxxas Revo.Features: Black plastic construction Standard and maximum throw steering stops Includes: Stee...
View full details
These are the optional axle carriers left and right for use on the Traxxas Revo series.Features: Nylon construction that’s black in color Allows f...
View full details
CS 3x10 flathead (hex drive) Set of four 3x10 mm flat-head machine screws with hex drive heads Replacement part for these models: 4-Tec® 2.0 AWD...
View full details
ALUMINUM CASTER BLOCKS: Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to th...
View full details
Rod Ends, short (6)/ hollow balls (6) Set of six short rod ends with hollow ball connectors Replacement part for these models: 4-Tec® 2.0 AWD Ch...
View full details
Tires & wheels(Tracer 2.2" black chrome wheels, Anaconda 2.2")
Maxx Performance Mini Maxx does what the others can’t, in a fast, fun, and compact form that’s instantly recognizable and engineered to a zero-co...
View full details
Driveshafts, front, steel-spline constant-velocity (complete assembly) (2) Extreme heavy-duty front steel CV (constant velocity) driveshafts are e...
View full details
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 13-tooth (32-pitch) pinion gear is mach...
View full details
Traxxas Battery/charger completer pack (includes TRA2969 2-amp NiMH peak detecting AC charger (1), TRA2923X 3000mAh 8.4V 7-cell NiMH battery (1))
LaTrax Alias Quad-RotorReady-To-Fly Helicopter 2.4GHz radio system Quad-rotor thrust with auto-leveling 6-axis flight system Four high-output...
View full details
This is a replacement Traxxas 20 Tooth X-Maxx Transmission Input Gear. One 2.5x12mm pin is also included. Features: 20T Replacement Part Include...
View full details
Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 15-tooth pinion gear (1.0 metric pitch) fits...
View full details
Ball bearings, black rubber sealed (5x8x2.5mm) (2) Pair of 5x8x2.5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal...
View full details
Shaft, GTX shock TiN-coated (2) (assembled with rod ends and steel hollow balls) Pair of 110 mm titanium-nitride coated long GTX shock shafts. TiN...
View full details
Traxxas Antenna Crimp Nut & Antenna Nut Tool Jato Features: Anodized Blue Aluminum crimp nut Includes: One crimping nut Nylon wrench Part...
View full details
This is a replacement LaTrax 54 tooth Spur Gear. Features:Factory Replacement Spur Gear Includes:(1) 54T Spur Gear
This is a replacement Traxxas 1/16 Steel Center Drive Shaft Set, and is intended for use with the Traxxas 1/16 scale family of 4WD vehicles. These ...
View full details
These are the short half shafts for use on the Traxxas Summit Truck RTR.Features: Plastic construction that’s black in colorIncludes: Two Short Hal...
View full details
This is the upper & lower left front suspension arm set for the REVO from Traxxas.Features: Durable black nylon constructionIncludes: Upper and...
View full details
Ball bearings, blue rubber sealed (4x7x2.5mm) (2) Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal bearings for ...
View full details
Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) The 54-tooth spur gear (32-pitch) fits the 6814 center ...
View full details
This is a replacement Traxxas Long Wheelbase Chassis. Even at maximum speed, E-Maxx feels stable and controlled thanks to its extra-long 335mm whee...
View full details
Steering bellcranks, drag link (blue-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled) Enhance steering precision, strengt...
View full details
Turnbuckles, toe link, 55mm (75mm center to center) (2)
Nuts, aluminum, flanged, serrated (4mm) (green-anodized)(4)