This is the Exo-Carbon finish wing for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction in an exo-carbon finishIncludes: One...
View full details
This is a replacement Motor Plate from Traxxas. Features: Aluminum construction Blue in color Includes: (1) Motor Plate Requires: Inst...
View full details
This is the complete differential assembly for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles. Not for use on 1/10 scale vehicles.Features: ...
View full details
This is the Traxxas set of four Hard Anodized GTR Shocks for the 1/16th scale.Features: Fully assembled Hard anodized Titanium shock shafts Inclu...
View full details
This is a replacement Traxxas Chassis, and is intended for use with the Traxxas Slash 4x4.
This is a Traxxas ProGraphix Body, and is intended for use with the Traxxas Slash 4X4 short course truck. With the ProGraphix process, you will nev...
View full details
This is a pack of two replacement Traxxas Pre-Mounted Robby Gordon Rear Tire & Wheels, and is intended for use with the Traxxas Slash Robby Gor...
View full details
Traxxas replacement GTR shock caps and spring retainers for the Revo. Replacement GTR shock retainers for the Traxxas Nitro Revo Monster Truck. INC...
View full details
This is the Traxxas pair of assembled GTR blue-anodized aluminum shocks without springs for the Traxxas Revo, E-Revo, Summit, Slayer and Jato. GTR ...
View full details
This is the black wing for the Traxxas Revo 3.3. This part attaches to the rear of the body.Features: Plastic construction that’s black in colorInc...
View full details
Traxxas Steel Rocker Arm Post Revo (2) These are the Steel Rocker Arm Posts for the REVO from Traxxas. Features: Black steel construction Include...
View full details
Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4) Two long and two sho...
View full details
Nuts, 5mm flanged nylon locking (steel, serrated) (8) Set of eight 5 mm nylon locking nuts feature a serrated flange to keep them snug on the whee...
View full details
Traxxas pivot balls and bushings for the E-Maxx and T-Maxx for the Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks. This package include...
View full details
Clutch shoes (2)/ spring (N. Rustler/N.Sport/N.Stampede) Replacement part for these models: Nitro Rustler® Nitro Slash TRX® 2.5R TRX® 3.3 TRX® Pr...
View full details
Cover, gear/ rubber gear cover plug/ 3x6 RM (2) Replacement gear cover for Magnum 272 transmissions. Includes clutch nut adjustment cover plug and...
View full details
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum stub axle carriers i...
View full details
Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 alumin...
View full details
Screws, 3x15mm flat-head machine (hex drive) (6) Set of six 3x15 mm flat-head machine screws with hex-drive heads Replacement part for these mode...
View full details
These are non-adjustable camber link for the Traxxas Rustler and Stampede.Features: Black Plastic ConstructionIncludes: Two Short and Two Long Link...
View full details
Screws, 3x10mm caphead machine (hex drive) (6)/ lockwashers (6)/ hex wrench Set of six 3x10 mm cap-head machine screws with hex drive heads and lo...
View full details
1/16 E-Revo Innovation, Precision, andPerformance With High-Torque Titan 550 Power!?Award-Winning E-Revo? Innovation - in 1/16 Scale!1/16 E-Revo? t...
View full details
This is a front winch bumper that fits that Traxxas TRX-4 1979 Bronco & Blazer with 8855 winch. Features: D-rings Fairlead Includes: (...
View full details
Ball bearing, black rubber sealed (6x16x5mm) (2) Pair of 6x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is the Motor Mount Washers and Screws for the Traxxas X-Maxx. Features: Aluminum Construction Blue in Color Exact Fit Includes: (4) W...
View full details
Traxxas Maxx Front/Rear Skidplate Set. Package includes replacement front and rear skidplates. Replacement part for these models: Maxx®
This is a replacement Traxxas Front Bumper, and is intended for use with the Traxxas Maxx Monster Truck. Features:Factory Replacement Bumper Includ...
View full details
Traxxas E-Revo 2.0 Aluminum Heavy-Duty Steering Link Push Rods are a machined aluminum upgrade that provides increased strength, lighter weight and...
View full details
This is the Traxxas Red 6061-T6 Aluminum Center Driveshaft for the 1/10 Slash 4x4 vehicles. Accessory Part For1/10 Ford Fiesta ST RallySlash 4x4 Br...
View full details
Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (...
View full details
Traxxas Power Cell 3000mah 7.2V NiMH iD Plug
Battery, Series 4 Power Cell, 4200mAh (NiMH, 6-C flat, 7.2V) Traxxas 4000-series Power Cell NiMH battery packs provide 25% greater capacity tha...
View full details
LaTrax Alias Quad-RotorReady-To-Fly Helicopter 2.4GHz radio system Quad-rotor thrust with auto-leveling 6-axis flight system Four high-output...
View full details
Short-Course Action With Incredible Power,Authentic Handling, and Serious Speed! Bigger. Faster. Louder. Slayer Pro 4X4 delivers the screaming sou...
View full details
¶ÿ PRO-SCALE PERFORMANCE Pro-Scale is a new Traxxas innovation that captures true-scale realism and combines it with extreme 6s LiPo power and 5...
View full details
Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) Extreme heavy-duty front out...
View full details
Ring gear, differential/ pinion gear, differential Differential ring and pinion gears Replacement part for these models: E-Revo® VXL Brushless
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Center Half Shafts.
This is a set of left and right rear stub axle carriers for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction Hold...
View full details
This is a set of Traxxas Box/Receiver/Wire Cover/Foam Pads.Features: Molded composite plastic receiver box with rubber plug Fastens to chassis to ...
View full details
This is a replacement Traxxas 9 Tooth LaTrax Pinion Gear, for use with the LaTrax 1/18 Desert Runner and 1/18 Teton. Features:Factory Replacement G...
View full details
This is the Traxxas caster steering block for the LaTrax.Features: Made of black plastic Includes: Two caster hubs (C-hubs) and two steering blo...
View full details
Spring, shock (GTR) (2.22 rate, black) (1 pair) 1/16 scale GTR shock springs use high-quality spring steel with a durable red powder-coated finish...
View full details
This is an optional Traxxas Aluminum Finned Motor Mount. Aluminum is great at dissipating heat making this mount a must have for any hot running mo...
View full details
Springs, front (progressive, +20% rate, blue) (2) Pair of long progressive-rate springs are custom-wound to provide responsive control over small ...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front of the...
View full details
Servo horn (with built-in spring and hardware) (for Summit locking differential) Shift servo horn with built-in spring tensioner Replacement part...
View full details