This is the rear bulkhead for use on the Traxxas 1/16 E-Revo and Slash vehicles.Features: Nylon construction that’s black in colorIncludes: Two Re...
View full details
This is a package of 6 threadlocked grubs (4mm) from Traxxas.Features: Threadlocking compound pre-applied Hardened steel construction Designed for...
View full details
These are the 3x6mm flathead machine screws used on the Traxxas T-Maxx 3.3 RTR.Features: Constructed of steel that’s black in colorIncludes: Six 3x...
View full details
This is an optional Traxxas Clear Body, and is intended for use with the Traxxas Stampede 1/10 truck. Package includes clear, pre-trimmed body and ...
View full details
Differential kit, center (complete) (aluminum carrier) Replace your Traxxas vehicle’s stock slipper clutch with this Pro-Built high-performance ce...
View full details
Traxxas Skid Plate Set 1/16 E-Revo/Slash VXL Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Slash Traxxas 1/16 Rally Traxxas 1/16 Summit Traxxas 1...
View full details
Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4) Suspension pin set includes 2x46 mm (2) and 2x14 mm (4) suspension pins. Fits front or ...
View full details
Drive hub, center, rear (1)/ 4x3 GS (1) Rear center drive hub with 4x3 mm grub screw Replacement part for these models: Ford Fiesta® ST Rally Fo...
View full details
This is the front heavy duty stub axles for the Stampede 4x4 from Traxxas.Features: Plastic and steel constructionIncludes: 2 Stub axlesRequires: I...
View full details
This is a replacement Traxxas Rear Bulkhead, and is intended for use with the Traxxas Slash 4x4 short course truck in addition to other Traxxas veh...
View full details
These are replacement slipper friction pegs for all of the Traxxas kits that have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...
View full details
Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2) Black differential output yokes (2) with 3x5 mm screws (2) and s...
View full details
This is the glow plug lead wire for the T-Maxx truck kit. This wire is attached to the glow plug that heats it while starting.Features: This is a ...
View full details
This is a pack of two replacement Traxxas 55mm Toe Link Turnbuckles. These adjustable turnbuckles come assembled with rod ends and pillow balls.
Shock tower (rear) Replacement rear shock tower Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replic...
View full details
Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2) Sealed receiver box for Traxxas micro receivers. Includes foam pad, silicone seal...
View full details
Battery, Series 3 Power Cell, 3300mAh (NiMH, 6-C flat, 7.2V) Traxxas 3000-series Power Cell NiMH battery packs provide excellent run times and “...
View full details
Gear, 23-T pinion (48-pitch) (fits 3mm shaft)/ set screw 23-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pi...
View full details
TRA5042 Traxxas Oil, differential (1M weight) (standard)
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)Extreme heavy-duty steel CV (constant velocity) driveshafts for the Traxxa...
View full details
LiPo Cell Voltage Checker/Balancer (2968X)The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included bal...
View full details
Sledgehammer Extreme Terrain Tires Extreme Terrain TractionSledgehammer extreme-terrain tires provide maximum traction and control on varie...
View full details
Servo horn, steering, metal/ 3x14 BCS (1) Replacement steel servo horn for TRX-4® and TRX-6® models. Replacement part for these models: TRX-4® 1...
View full details
Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768 or #7768R) Heavy-d...
View full details
Carburetor, complete (minus air filter assy.) (TRX® 2.5, 2.5R, 3.3 composite slide) The complete slide carburetor comes fully assembled and ready ...
View full details
This is a differential gear set for the Traxxas X-Maxx Monster Truck. Features: Hardened steel construction Includes:2x Output Gears4x Spider Gea...
View full details
These are the pivot balls and pivot ball caps for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Steel constructed pivot balls wit...
View full details
This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3. >FEATURES: Steel construction Silver in color Ç INCLUDES: Two 59mm screw pins ...
View full details
This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.Includes: One 70 tooth gearFeatures: Tough nylon construction Drilled fo...
View full details
Steering bellcranks (L&R)/ draglink Left and right steering bellcranks with drag link
Body, Rustler® (clear, requires painting)/window, lights decal sheet/ wing and aluminum hardware From mild to wild, Traxxas clear bodies are your ...
View full details
Traxxas Shock Tower Front Features: Made from black molded nylon For the Traxxas Stampede Specs: Height: 2 3/4" Thickness: 1/4" Width at base: 2...
View full details
This is a set of two optional blue aluminum steering blocks with ball bearings from Traxxas. These steering blocks mount the the front uprights, an...
View full details
Shock shafts, steel, chrome finish (xx-long) (2) Replacement XX-long steel shock shafts with chrome finish for Traxxas Ultra Shocks (2). Replacem...
View full details
Screws, 3x23mm button-head machine (hex drive) (6) 3x23 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Bulkhead (front) (black) Black composite front bulkhead Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica Bigfoot® O...
View full details
MAXX 1/10 Scale MAXX Monster Truck MEET THE NEW MAXX The Traxxas X-Maxx forever changed the face of RC monster trucks. Its radical new design, mas...
View full details
Tires & wheels, assembled, glued (black wheels, dual profile (2.8" outer, 3.6" inner), Sledgehammer® tires, foam inserts) (2) (17mm splined)...
View full details
TRA3037 Battery, RX Power Pack (5-cell hump style, NiMH, 1200mAh)
This is a pair of Traxxas GTR Assembled XX-Long Shocks (Without Springs) in Green for the Slash 4x4 Ultimate. These shocks feature PTFE-coated bodi...
View full details
Tailgate protector/ 3x8mm flathead screw (4) The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added dur...
View full details
This is a set of replacement Traxxas Differential And Transmission Yokes with Hardware , and are intended for use with the Traxxas 1/16 Slash, and ...
View full details
IF NOT IN STOCK REORDER RPM73162 OR RPM73165 OR RPM73164 OR RPM73169 These are the left and right axle carriers for use on the Traxxas 1/16 ...
View full details
Spur gear, 54-tooth (1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas...
View full details
Air filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ Revo® air filter base (angled)/wire mount/hardware (1 each) (TRX® Eng...
View full details
This is a 28-tooth 48-pitch replacement pinion gear for the Traxxas 4-Tec.Features: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD ...
View full details
Battery expansion kit (allows for installation of taller multi-cell battery packs) (Rustler®, Bandit, Stampede®) The battery expansion kit allows ...
View full details