Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) The 54-tooth spur gear (32-pitch) fits the 6814 center ...
View full details
This is a replacement Traxxas Long Wheelbase Chassis. Even at maximum speed, E-Maxx feels stable and controlled thanks to its extra-long 335mm whee...
View full details
Steering bellcranks, drag link (blue-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled) Enhance steering precision, strengt...
View full details
Turnbuckles, toe link, 55mm (75mm center to center) (2)
Nuts, aluminum, flanged, serrated (4mm) (green-anodized)(4)
Sold out
The Traxxas Magnum 272R Assembled Transmission has been developed specifically for hard hitting drag applications. This replacement transmission is...
View full details
This is a replacement Traxxas Caster Block Set, and is intended for use with the Traxxas Maxx Monster Truck. Features:Factory Replacement Caster Bl...
View full details
Body mounts & posts, front & rear (complete set) Front and rear body posts and mounts. Includes screws. Replacement part for these models...
View full details
This is the Traxxas slipper clutch rebuild kit.Includes: Two steel disc Two friction insert 4.0mm NL Two spring washers
These are the Traxxas 17mm Serrated Splined Wheel Nuts, replacement part for the X-Maxx and can also be used on the VXL Revo. Features: Aluminum c...
View full details
Wheel hubs, hex (2)/ hex clips (2) Pair of 24 mm splined wheel hex hubs with hex clips (2) Replacement part for these models: X-Maxx® XRT® Acce...
View full details
Suspension pin set, complete (front & rear) / hardware Complete front and rear suspension pin set with hardware Replacement part for these mo...
View full details
This is an optional Traxxas Extended Wheelbase Rear Suspension Arm Set, and is intended for use with the Traxxas 1/16 E-Revo. Add 10mm of wheelbase...
View full details
Wing, 1/16 E-Revo (black)/ decal sheet 1/16 scale E-Revo® wing with decal sheet Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo®
PLATE, MOTOR Replacement blue aluminum motor plate Replacement part for these models: Ford® F-150® Raptor R™ 4X4 Hoss® 4X4 VXL Slash 4X4 VXL Sla...
View full details
Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4) Set of two heavy-duty half shafts includes internal shaft...
View full details
This is a optional Traxxas Aluminum Steering Block Set, and is intended for use with the Traxxas Slash 4x4 truck. Precision-machined for total stee...
View full details
This is an optional Traxxas LED Light Bar Set and is intended for use with the Traxxas Summit. Now you can blaze even brighter trails! The new Acce...
View full details
Steering arm (upper & lower)/ servo saver/ servo saver spring/ steering arm shaft Upper and lower steering arms with integrated servo saver, s...
View full details
This is the set of axle pins for the Traxxas T-Maxx 4WD RTR Monster Truck. These pins go through the stub axles on each wheel, the wheel hubs are t...
View full details
Traxxas Skid Plate Front Plastic Gray Features: Attaches to and protects chassis and supports the front bulkhead Skidplate is gray in color Inclu...
View full details
TRA3742 Shoulder screws, steering bellcranks
Velineon VXL-3m Brushless Power System, waterproof (includes waterproof VXL-3m ESC and Velineon 380 motor)
Push rod (steel), heavy duty (2) (assembled with rod ends) Replacement heavy-duty steel push rods for E-Revo® VXL. Rods come assembled with rod en...
View full details
This is a set of two replacement stub axle carriers from Traxxas intended for the Maxx. Features: Traxxas Quality and Precision Factory Replacemen...
View full details
Body reinforcement set (fits #7711 body) X-Maxx® body reinforcements provide added protection for your truck during extreme driving. These high-st...
View full details
Chassis top brace Replacement X-Maxx® chassis top brace Replacement part for these models: X-Maxx® Ultimate X-Maxx®
Sway bars (front & rear) Front and rear sway bars Replacement part for these models: Unlimited Desert Racer®
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Steel Machined Steel Drive Cups. Also included are two 4x17mm screw pins.
Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 16-tooth pinion gear (1.0 metric pitch) fi...
View full details
These are the Traxxas Premounted Off-Road Monster Truck Tires on 5-Spoke Wheels for the LaTrax Teton Monster Truck.Features: Black colored Plastic...
View full details
This is a shock spring set for the Traxxas 1/16 Summit with a 3.2 rate (Purple).Features: GTR shock springs for the 1/16 Summit Steel construction...
View full details
Cush drive key/ pin/ elastomer damper Cush drive key includes pin and elastomer damper Replacement part for these models: E-Revo® VXL Brushless ...
View full details
Suspension arms upper (1)/ suspension arm lower (1) (right front) Upper and lower front right suspension arms Replacement part for these models: ...
View full details
This is a pair of Traxxas optional red aluminum pushrods for the rocker arms on the REVO. These go between the rocker arms and the lower suspension...
View full details
This is the pair of steel pushrods for the Traxxas Revo.Features: Metal pushrod construction Plastic rod ends with hollow ball ends Includes: Two...
View full details
Traxxas EZ start system is a simple push-button starting for glow plug and starter motor. LED status for both glow plug and starter motor All-in-on...
View full details
Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6) Set of six 3x15 mm cap-head machine screws with hex-drive heads and w...
View full details
Suspension arms (lower) (2) (fits T-Maxx®/E-Maxx) Pair of replacement lower suspension arms for T-Maxx® and E-Maxx® trucks. Replacement part for ...
View full details
Wheelie bar, assembled (fits all T-Maxx®/E-Maxx® trucks) The Maxx® wheelie bar has 4 snap-in adjustment positions that allow you to choose how ext...
View full details
Hex wheel hubs, steel (2)/ axle pins (2.5x12mm) (2) 14 mm steel wheel hubs provide superior strength and durability and won't round off. Includes ...
View full details
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer (requires 5x11 BB (2) Steering bellcranks with servo saver, servo save...
View full details
This gear is a steel pinion gear in 48 pitch.Features: Steel pinion gearIncludes: 1 gear and 1 set screwSpecs:Pitch: 48Tooth: 25Shaft length: 3/16S...
View full details
Spur gear, 56-tooth (0.8 metric pitch, compatible with 32-pitch) 56-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
Tires & wheels, assembled, glued (2.8") (All-Star black chrome wheels, Alias® tires, foam inserts) (rear) (2) (TSM® rated) Alias® step-pin tir...
View full details
This is a set of two optional blue aluminum stub axle carriers with bearings from Traxxas. These stub axle carriers mount to the rear control arms,...
View full details
Steering blocks (l&r) Replacement left and right steering blocks Replacement part for these models: Bandit®
