TRA3627X Battery hold-down
TRAXXAS
Battery hold-down (grey) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad Gray ba...
View full detailsBattery hold-down (grey) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad Gray ba...
View full detailsScrews, 4x30mm button-head machine (hex drive) (6) 4x30 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsTurnbuckles, camber link, 47mm (67mm center to center) (front)
This is a Traxxas Front/Rear Steel Center Assembled Constant-Velocity Driveshaft Set for the E-Revo VXL Brushless. These Constant Velocity Drivesha...
View full detailsTraxxas Rustler 4X4 Roof Skid Plate. Package includes replacement skid plate and four 3x12mm cap head screws.
Toe link, 5.0mm steel (front or rear) (2) Pair of steel 5 mm toe links fit front or rear Replacement part for these models: E-Revo® VXL Brushless
Wheelie bar, black (assembled) X-Maxx® wheelie bar comes assembled with wheels Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT...
View full detailsTurnbuckles, 36mm (2) Pair of 36 mm turnbuckles. Includes spacers. (rod ends sold separately) Replacement part for these models: Drag Slash 1967...
View full detailsRebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft) Rebuild kit for u...
View full detailsThis is a replacement Traxxas X-Maxx Steering and Linkage Servo Horn. This steering link comes assembled pivot balls.
This is a replacement LaTrax 10 Tooth Pinion Gear, with set screw. This package also includes a small bracket and two mounting screws. Features:Fa...
View full detailsThis is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front and re...
View full detailsSpur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) 50-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full detailsThis is a replacement Traxxas Rear Stub Axle, and is intended for use with the Traxxas Slash 4x4, Slash 4x4 Ultimate, Rally and Slash equipped with...
View full detailsThis is a foam body washer set with two each of 2mm, 3mm, and 4mm foam washers from Traxxas.
This is the optional heavy-duty servo saver spring for the Traxxas Revo.Features: Steel construction Chrome Plated Conical Shape Includes: One He...
View full detailsDifferential output yokes, hardened steel (w/ U-joints) (2) Hardened steel differential output yokes provide extra strength for 2WD models using m...
View full detailsThis is the optional glow plug wrench from Traxxas.Features: Features aluminum construction and a dull silver color Will work on 7mm and 8mm glow ...
View full detailsThis is a 6 pack of Traxxas 4X6mm button head screws.Features: Steel construction that is black in color Button head design Includes: Six 4X6mm b...
View full detailsThis is a replacement Traxxas Body Mount Set. This set includes the front and rear mount.
Caster blocks (left & right) (30-degree) Replacement left and right 30° caster blocks Replacement part for these models: Bandit® VXL Bandit®...
View full detailsServo, digital high-torque (ball bearing), waterproof (X-Maxx mount)
The Traxxas Slash 4x4 Pro-Built Rear Differential is a prebuilt replacement for Slash 4X4 Short Course Trucks. Traxxas Pro-Built parts allow you to...
View full detailsInput gear, 22-tooth/ input shaft (transmission) (heavy duty) (fits Bandit®, Rustler®, Stampede®, Slash® 2WD) The heavy-duty input shaft features...
View full detailsThis is a set of eight Traxxas 5mm Black Serrated Steel Flanged Nylon Locking Nuts for the Unlimited Desert Racer. Features: Made of steelSerrated...
View full detailsThis is a replacement Traxxas Maxx Outer Stub Axle Assembly, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. This part is for fron...
View full detailsTRA5041 Traxxas Grease, premium high performance (20cc)
Screw pin, 4x15mm (6) Set of six 4x15 mm screw pins with hex-drive heads Replacement part for these models: E-Revo® VXL Brushless Revo® Slayer® ...
View full detailsThis is a replacement Traxxas Center Rear Driveshaft for the Unlimited Desert Racer. Features: Fully assembled Made from 6061-T6 aluminum Black-...
View full detailsThe Traxxas E-Revo 2.0 Heavy-Duty Front Left Suspension Arm Set features a design which incorporates latest proprietary composite material. Traxxas...
View full detailsFender flares, front & rear (2 each) (fits #8011 or #8211 series bodies) Front and rear fender flares for the TRX-4® 8011-series Land Rover® ...
View full detailsTraxxas Wrist Pin/Clips (2) TRX 3.3 Fits: Traxxas TRX 3.3
Screws, 3x30mm cap-head machine (hex drive) (6) 3x30 mm cap-head machine screws with hex drive heads. Set of six.
Pinion gear, differential, 13-tooth (rear) (use with #7779 42-tooth differential ring gear) 13-tooth rear differential pinion gear. Use with 7779 4...
View full detailsThis is the Exo-Carbon finish wing for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction in an exo-carbon finishIncludes: One...
View full detailsThis is a replacement Motor Plate from Traxxas. Features: Aluminum construction Blue in color Includes: (1) Motor Plate Requires: Inst...
View full detailsThis is the complete differential assembly for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles. Not for use on 1/10 scale vehicles.Features: ...
View full detailsThis is the Traxxas set of four Hard Anodized GTR Shocks for the 1/16th scale.Features: Fully assembled Hard anodized Titanium shock shafts Inclu...
View full detailsThis is a replacement Traxxas Chassis, and is intended for use with the Traxxas Slash 4x4.
This is a Traxxas ProGraphix Body, and is intended for use with the Traxxas Slash 4X4 short course truck. With the ProGraphix process, you will nev...
View full detailsThis is a pack of two replacement Traxxas Pre-Mounted Robby Gordon Rear Tire & Wheels, and is intended for use with the Traxxas Slash Robby Gor...
View full detailsTraxxas replacement GTR shock caps and spring retainers for the Revo. Replacement GTR shock retainers for the Traxxas Nitro Revo Monster Truck. INC...
View full detailsThis is the Traxxas pair of assembled GTR blue-anodized aluminum shocks without springs for the Traxxas Revo, E-Revo, Summit, Slayer and Jato. GTR ...
View full detailsThis is the black wing for the Traxxas Revo 3.3. This part attaches to the rear of the body.Features: Plastic construction that’s black in colorInc...
View full detailsTraxxas Steel Rocker Arm Post Revo (2) These are the Steel Rocker Arm Posts for the REVO from Traxxas. Features: Black steel construction Include...
View full detailsServo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4) Two long and two sho...
View full detailsNuts, 5mm flanged nylon locking (steel, serrated) (8) Set of eight 5 mm nylon locking nuts feature a serrated flange to keep them snug on the whee...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS