This is the input shaft for use on the Traxxas Slash 4x4 vehicles.Features: Steel construction that is black in colorIncludes: Input Shaft Bearing...
View full details
This is a package of replacement caster spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels.Features: Black nylon constru...
View full details
Tires & wheels, assembled, glued (2.8") (All-Star chrome wheels, Alias® tires, foam inserts) (electric rear) (2) Alias® step-pin tires provide...
View full details
Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls) 59 mm (78 mm center to center) adjustable toe l...
View full details
Camber link set (plastic / non-adjustable ) ( front & rear) (gray) Non-adjustable gray composite camber link set includes front and rear links...
View full details
Screws, 3x10mm cap-head machine (6) (no washer)
Screws, 3x30mm button-head machine (hex drive) (6) 3x30 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Gear, 19-T pinion (48-pitch) / set screw 19-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full details
Fuel line (610mm or 2ft) 24" fuel line Replacement part for these models: Jato® Nitro Rustler® Nitro Slash Revo® Slayer® Pro 4X4 T-Maxx® Access...
View full details
Carriers, stub axle (left & right) (requires 20x32x7 ball bearings) Left and right stub axle carriers. Required 20x32x7 bearings. Replacemen...
View full details
Traxxas Premium Shock Oil (20 wt) Traxxas premium 20 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silico...
View full details
Traxxas X-Maxx Rear Body Support. Package includes replacement rear body support and hardware. Includes: Rear body Support (2) 3x15mm CS (2) 3x1...
View full details
Traxxas Rustler 4X4 Rear Bumper. Package includes replacement rear bumper and mount components. Features:Factory Replacement Bumper Components Incl...
View full details
This is a set of eight Traxxas Heavy Duty Toe Link Rod Ends with pre-installed hollow balls ready for installation on the E-Revo VXL Brushless.
Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 16X23.5X.5 TW Differential carrier includes X-ring gaskets (2), ring gear gasket, and...
View full details
This is a replacement Traxxas X-Maxx Hardened Steel Shock Mount Suspension Pin Set, including two 4x25mm and two 4x38mm pins. For use in the front ...
View full details
This is a replacement LaTrax Camber and Toe Link Set. This set includes four camber links and two toe links. Features:Factory Replacement Camber an...
View full details
Differential kit, center (complete) The optional center differential transfers power to the front and rear differentials independently for smooth ...
View full details
These are the optional 17mm splined wheel hubs for the T-Maxx 3.3 4WD Nitro Monster Truck RTR.Features: Aluminum construction that’s blue anodized...
View full details
This is the optional 36 tooth spur gear for the Traxxas Revo monster truck. This spur gear goes on the gear box to transfer power from the clutch b...
View full details
This is a 4x10mm button head screw set for the Traxxas Revo vehicle.Features: Steel construction that’s black in color Low-profile, button-head de...
View full details
These are the 4x16mm Button Head Machine Screws from Traxxas.Features: For use in the Traxxas Revo and also anywhere a screw this size is required...
View full details
Screws, 3x14mm button-head machine (hex drive) (6) 3x14 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
This is a Traxxas LED roof light bar for the TRX-4 sport body. Requires: TRA8028 Power Supply Replacement part for this model: TRX-4 Equipped with ...
View full details
This is a replacement Traxxas 122.5mm Heavy Duty Steel Constant-Velocity Driveshaft; shaft only.
This is the optional clear gear cover for use on the Traxxas Slash 4x4.Features: Plastic construction that is clear in colorIncludes: One Clear Gea...
View full details
Springs, rear (progressive, +20% rate, blue) (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over smal...
View full details
Features:Hardened plastic constructionBlack in colorIncludes:One motor mount assembled with a 3x6mm flat head machine screwOne 3mm locknutRequires:...
View full details
Traxxas Aluminum Caster Blocks are CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, Rustler 4x...
View full details
Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxa...
View full details
This is the wing mount for the Traxxas Revo 3.3.Features: Nylon construction that’s black in colorIncludes: Two Wing Supports Wing Mount Four 4mm ...
View full details
Header, exhaust (tubular aluminum, silver anodized) (TRX® 2.5, 2.5R) Silver-anodized tubular aluminum exhaust header for the TRX® 2.5, 2.5R, and 3...
View full details
Skid plate set, front (2 pieces, plastic)/ skid plate, rear (1 piece, plastic) Skid plate set includes front and rear skid plates. Replacement pa...
View full details
Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch) 58-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
Screws, 3x18 button-head machine (hex drive) (6) 3x18 mm button-head machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details
Screws, 3x8mm countersunk machine (6) (hex drive) 3x8 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details