Traxxas pivot balls and bushings for the E-Maxx and T-Maxx for the Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks. This package include...
View full details
Clutch shoes (2)/ spring (N. Rustler/N.Sport/N.Stampede) Replacement part for these models: Nitro Rustler® Nitro Slash TRX® 2.5R TRX® 3.3 TRX® Pr...
View full details
Cover, gear/ rubber gear cover plug/ 3x6 RM (2) Replacement gear cover for Magnum 272 transmissions. Includes clutch nut adjustment cover plug and...
View full details
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum stub axle carriers i...
View full details
Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 alumin...
View full details
Screws, 3x15mm flat-head machine (hex drive) (6) Set of six 3x15 mm flat-head machine screws with hex-drive heads Replacement part for these mode...
View full details
These are non-adjustable camber link for the Traxxas Rustler and Stampede.Features: Black Plastic ConstructionIncludes: Two Short and Two Long Link...
View full details
Screws, 3x10mm caphead machine (hex drive) (6)/ lockwashers (6)/ hex wrench Set of six 3x10 mm cap-head machine screws with hex drive heads and lo...
View full details
This is a front winch bumper that fits that Traxxas TRX-4 1979 Bronco & Blazer with 8855 winch. Features: D-rings Fairlead Includes: (...
View full details
Ball bearing, black rubber sealed (6x16x5mm) (2) Pair of 6x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is the Motor Mount Washers and Screws for the Traxxas X-Maxx. Features: Aluminum Construction Blue in Color Exact Fit Includes: (4) W...
View full details
Traxxas Maxx Front/Rear Skidplate Set. Package includes replacement front and rear skidplates. Replacement part for these models: Maxx®
This is a replacement Traxxas Front Bumper, and is intended for use with the Traxxas Maxx Monster Truck. Features:Factory Replacement Bumper Includ...
View full details
Traxxas E-Revo 2.0 Aluminum Heavy-Duty Steering Link Push Rods are a machined aluminum upgrade that provides increased strength, lighter weight and...
View full details
This is the Traxxas Red 6061-T6 Aluminum Center Driveshaft for the 1/10 Slash 4x4 vehicles. Accessory Part For1/10 Ford Fiesta ST RallySlash 4x4 Br...
View full details
Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (...
View full details
Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) Extreme heavy-duty front out...
View full details
Ring gear, differential/ pinion gear, differential Differential ring and pinion gears Replacement part for these models: E-Revo® VXL Brushless
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Center Half Shafts.
This is a set of left and right rear stub axle carriers for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction Hold...
View full details
This is a set of Traxxas Box/Receiver/Wire Cover/Foam Pads.Features: Molded composite plastic receiver box with rubber plug Fastens to chassis to ...
View full details
This is a replacement Traxxas 9 Tooth LaTrax Pinion Gear, for use with the LaTrax 1/18 Desert Runner and 1/18 Teton. Features:Factory Replacement G...
View full details
This is the Traxxas caster steering block for the LaTrax.Features: Made of black plastic Includes: Two caster hubs (C-hubs) and two steering blo...
View full details
Spring, shock (GTR) (2.22 rate, black) (1 pair) 1/16 scale GTR shock springs use high-quality spring steel with a durable red powder-coated finish...
View full details
This is an optional Traxxas Aluminum Finned Motor Mount. Aluminum is great at dissipating heat making this mount a must have for any hot running mo...
View full details
Springs, front (progressive, +20% rate, blue) (2) Pair of long progressive-rate springs are custom-wound to provide responsive control over small ...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front of the...
View full details
Servo horn (with built-in spring and hardware) (for Summit locking differential) Shift servo horn with built-in spring tensioner Replacement part...
View full details
This is the suspension multi-tool for Traxxas Revo. It is used to adjust the Shock Upper Cap, Shock Rod-end removal/install and to tighten/loosen t...
View full details
These are the replacement FWD/REV output gears for the Traxxas Nitro Revo Monster Truck.Features: Nylon construction that’s black and white in colo...
View full details
This is a set of optional Traxxas black chrome front and rear bumpers for the Revo series.Features: Plastic construction that is black chrome in co...
View full details
Traxxas front left and right halves differential bulkhead for the Revo are constructed of black plastic. Rocker shafts preinstalled. This package i...
View full details
Air filter housing/ foam insert/ straight base/ angled base/ cable tie (1-each) (TRX® 2.5, 2.5R, 3.3) Air filter housing with foam insert include ...
View full details
Ball bearings (5x10x4mm) (2) (metal shielded, for clutch bell) Pair of 5x10x4 mm ball bearings Replacement part for these models: Jato® Revo® Sl...
View full details
Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2) Change the ride height on your vehicle with these spring pre-load spacers for Traxxas ...
View full details
These are the Traxxas optional aluminum steering blocks in green for the Rustler, Stampede and Bandit.Features: T-6061 aluminum construction that’s...
View full details
Traxxas Main Chassis Gray Features: Nylon Construction Grey in Color Includes: One Grey Nylon Chassis Part Compatibility: Traxxas Stampede
Turnbuckles, 78mm (2) Replacement 78 mm metal turnbuckles. Rod ends sold separately. Replacement part for these models: BIGFOOT® No. 1 Officiall...
View full details
Traxxas Top Fuel Power Plus 33% Nitro Fuel (One Quart)
Body, LaTrax® Desert PreRunner (clear, requires painting)/ decals From mild to wild, Traxxas clear bodies are your own personal canvas. You choos...
View full details
Traxxas Spinning carousel rack (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils)
Wheel nuts, splined, 17mm, serrated (red-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug n...
View full details
This is a replacement Traxxas Maxx Driveshaft Assembly, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. Features: Factory Replac...
View full details
This a steel servo horn from Traxxas intended for the Maxx vehicle. Features:Steel Construction Includes:(1) Steel Servo Horn
Wheel hubs, splined, 17mm (red-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile l...
View full details
