Carrier, differential (aluminum)/ (requires #7783X spider gear shaft) Aluminum differential carrier includes X-ring gaskets (2), ring gear gasket,...
View full details
Suspension arms, front (right), heavy duty (upper (1)/ lower (1)) Heavy-duty E-Revo® suspension arms utilize our latest proprietary composite mat...
View full details
Ball bearing, black rubber sealed (20x27x4mm) (2) Pair of 20x27x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is a set of replacement Traxxas Caster Blocks intended for the 4-Tec 2.0. Features:Nylon/Plastic Construction Includes: (2) Caster Blocks (4)...
View full details
This is the Traxxas X-Maxx Green Aluminum Motor Mount Washer and Screw Set. This set includes four washers and four screws.FitsX-Maxx 6SX-Maxx 8S
Features:Steel and aluminum constructionIncludes:Two each; Shafts and Aluminum SpacersFour Gear Pads
This is a set of Traxxas Steel upper and lower Tie Bars.Features: Steel construction Mounts upper and lower bulkhead halves in place Includes: On...
View full details
This is the Traxxas 14T Pinion Gear and Set Screw for the LaTrax Rally Car.Features: Silver/grey colored Made of steel For the LaTrax Rally Car I...
View full details
This is a set of optional Traxxas Assembled Steel CV Driveshafts, and are intended for use with the Traxxas 1/16 E-Revo VXL.Traxxas Steel Constant ...
View full details
Features:Aluminum constructionAnodized red in colorIncludes:Four Toe LinksEight Hollow BallsOne 5mm WrenchRequires:Installation on the vehicleTechn...
View full details
These are the front and rear toe links for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction that is red in colorIncludes: F...
View full details
This is a replacement Traxxas Rear Suspension Arm Set. Features:Factory Replacement Suspension Arm Set Includes: (2) Upper Suspension Arms (Right...
View full details
SHOCK TOWER, FRONT Replacement front shock tower Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Rally Slash 4X4 Ultim...
View full details
Bulkhead tie bars, front & rear, aluminum (blue-anodized) Set of front and rear bulkhead tie bars with a brilliant blue anodized finish Repla...
View full details
Driveshaft, center, 6061-T6 aluminum (blue-anodized) Formed from 6061-T6 aluminum, this center driveshaft is both strong and lightweight. Internal...
View full details
This is the ProGraphix body for the Traxxas Stampede 4x4 VXL.Features: Black, silver, gray and carbon fiber painted graphics Pretrimmed Includes:...
View full details
This is the Traxxas Gear, 29-T pinion (1.0 metric pitch, 20° pressure angle) (fits 5mm shaft)/ set screw. This is Traxxas part number 6492Part Num...
View full details
This is the Traxxas Y-Harness, Servo and LED Light Set.Features: Black and red colored Made of durable material Includes:One Traxxas Y-Harness, S...
View full details
This is a replacement Differential part set, intended for use with the Traxxas Summit Monster Truck. Includes: Heavy Duty Differential Carrier (1)...
View full details
Spring, shock (GTR) (6.4 rate purple) GTR shock springs use high-quality spring steel with a durable red powder-coated finish. GTR springs are off...
View full details
This is the replacement fuel tank cap O-rings for the Traxxas Revo model.Features: Rubber construction that’s orange in colorIncludes: Two rubber O...
View full details
Wheel nuts, splined, 17mm (blue-anodized) (4) This set of four 17 mm blue aluminum wheel nuts is beautiful anodized for eye-catching looks with Tr...
View full details
Traxxas piston and sleeve with two wrist pin clips for the Traxxas TRX 3.3 engines Traxxas piston and sleeve are made of ABC construction, Aluminum...
View full details
Screw pins, 4x13mm (with threadlock) (4) Set of four 4x13 mm screw pins with hex-drive heads and threadlock Replacement part for these models: R...
View full details
Ball bearings, blue rubber shield (5x10x4mm) (2) Pair of 5x10x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
Traxxas updated stock replacement fuel tank is made of clear, nylon construction. Black fuel tank cap (spring loaded). This fuel tank is unique to ...
View full details
Lightweight and great looking, these blue-anodized aluminum flange lock nuts are the perfect finishing touch for your truck. Accessory part for th...
View full details
These are plastic washers from Traxxas. This will work of the Nitro Rustler.Features: Plastic constructionIncludes: Ten WashersRequires: Traxxas Ni...
View full details
Spur gear, 68-tooth (0.8 metric pitch, compatible with 32-pitch) 68-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch) 65-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performanc...
View full details
Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 20-tooth (32-pitch) pinion gear is mach...
View full details
This is a 4x14mm Button Head Screw Set for the Traxxas Revo vehicle. Features Steel constructionBlack in colorLow-profile, button-head designHex dr...
View full details
Body mounts, front & rear/ body mount posts, front & rear (adjustable)/ 2.5x18mm screw pins (4) Front and rear adjustable body mounts with...
View full details
Tires & wheels, assembled (Tracer 2.2" chrome wheels, Alias 2.2" tires)
Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) The 54-tooth steel spur gear (32-pitch) fits the...
View full details
The Traxxas Slash 4x4 Pro-Built Front Differential is a pre-built replacement for Slash 4x4 Short Course trucks. Traxxas Pro-Built parts allow you ...
View full details
Oil, differential (500K wt) (0.7 oz (20cc)) Thick 500k weight differential oil adds significant locking action to your differentials. Traxxas perf...
View full details
This is a pack of two Traxxas Maxx All-Terrain Tires pre-mounted to black wheels with a splined 17mm hex. These tires have been glued to the wheel ...
View full details
This is the Traxxas Unlimited Desert Racer Lower Left Suspension Arm with Insert and Pre-Installed Hollow Ball.Stock Replacement OnUnlimited Desert...
View full details
This is a pack of two replacement Traxxas 4-Tec 2.0 1.9" Response Front Tires Pre-Assembled on Black Chrome Split-Spoke Wheels. These wheels featur...
View full details
Tires & wheels, assembled, glued (Geode chrome wheels, paddle tires, foam inserts) (2) (use with 17mm splined wheel hubs & nuts, part #535...
View full details
All-Star black chrome wheels, paddle tires, foam inserts,electric rear (2) TSM rated.
Nuts, 4mm flanged nylon locking, serrated (black) (10) Set of ten black flanged nylon locking nuts Replacement part for these models: 4-Tec® 2.0...
View full details
This is the Spool Housing, Spool Shaft and Bushing for the Traxxas 4-Tec 2.0 chassis and Ford GT. Features: Molded Composite Housing & Bush...
View full details
This is the connecting rod for the Traxxas 2.5 and 3.3 Engine. This part connects the piston to the crankshaft.Features: Aluminum construction Pre...
View full details
This is the Traxxas X-Maxx Replacement Center Skidplate.Features Molded composite plastic construction Reduces damage to underside of chassis and ...
View full details
