Traxxas front skidplate for the Traxxas T-Maxx Monster Truck. This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930 and provi...
View full details
Nuts, 5mm nylon locking (8) Replacement part for these models: Jato® Nitro Rustler® Revo® Slayer® Pro 4X4 T-Maxx®
These are the 3mm x 10mm shoulder screws for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s black in colorIncludes: Six 3...
View full details
Box, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2) Sealed receiver box for Traxxas micro receivers....
View full details
Screws, 3x12mm roundhead self-tapping (6)
Suspension pins, outer, rear, 3.5x56.7mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2) Two 3.5x56.7 mm hardened steel outer rear suspension pins ...
View full details
This is a LED Light Set. You must have the TRA8090 light kit to completely install this product. This lighting kit is compatible with the Scale and...
View full details
Wheel hubs, splined, 17mm (orange-anodized) (4)/ 4x5mm GS (4)/ 3x14mm pin (4) Set of four 17 mm orange-anodized aluminum wheel hubs combine high-...
View full details
Traxxas Power Tap Connector with Cable. Pakcage includes connector, power tap with cable and two 2.6x8mm button head screws. Use TRA6549 power tap...
View full details
Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 19-tooth (32-pitch) pinion gear is mach...
View full details
Traxxas Paddle Tires let you tear up sand, snow - and even water! These paddles are pre-mounted on black wheels that will fit the Unlimited Desert ...
View full details
LED expedition rack scene light kit (fits #8111 or 8213 series bodies, requires #8028 power supply) TRX-4® Sport LED Scene Lights attach directly ...
View full details
TRX-4 SPORT LIGHT KITS Hit the Trail Day or Night with Rock-Solid Reliability Genuine Traxxas LED light kits for the TRX-4 Sport are engineere...
View full details
This is a replacement Traxxas Center Driveshaft in blue anodized aluminum. Features: Blue Anodized Finish Aluminum Construction Light Weight Incl...
View full details
This Skid Plate Set is a replacement part for The Traxxas E-Revo VXL and fits #8629 and #8630 Bulkheads. Features:Factory Replacement Skid Plate Se...
View full details
Spur gear, 70-tooth 70-tooth spur gear (48-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear rat...
View full details
This is a pack of four replacement Traxxas 4-Tec 2.0 Shock Caps. These caps feature installed eyelets.
This is a pack of two replacement Traxxas 4-Tec 2.0 Rear Driveshafts.
This is a set of four Traxxas Y-Spoke chrome mounted Pro-Trax on-road tires and wheels. They come with superb pre-glued racing tires with contoured...
View full details
This is the pair of two Traxxas Front/Rear Aluminum Driveshaft Assembly for the LaTrax Rally Car.Features: Blue colored Made of Aluminum replaces ...
View full details
This is a replacement LaTrax Steering Bellcrank Set. Package includes steering bellcranks, servo saver, spring, spring retainer, posts and draglink...
View full details
Traxxas 7438 Linkage Steering 1/10 Rally Slash Fits: Traxxas Rally Traxxas Slash 4x4 Ultimate
Cover, gear/ motor wire hold-down clip Replacement gear cover with motor wire hold-down clip Replacement part for these models: Ford® F-150® Rap...
View full details
TRA6757 Rebuild kit, steel-splined constant-velocity driveshafts
This is the stock Battery Hold Down for the Traxxas Stampede 4x4 VXL. Features Composite constructionHolds stock 7-cell battery supplied with vehic...
View full details
This is the Traxxas 35mm Flywheel with Magnet.Features: For Traxxas glow powered vehicles Magnet provides an RPM sensor to read RPM data Includes...
View full details
Skidplates, front & rear (black) Black front and rear skid plates Replacement part for these models: Ford® F-150 Raptor Ford® F-150® Raptor ...
View full details
Lower chassis, low CG (black) Change up the color on your low-CG-equipped 2WD Slash with this accessory lower chassis. Does not fit standard chass...
View full details
Servo horn (with built-in spring and hardware) (for Summit locking differential) Shift servo horn with built-in spring tensioner Replacement part...
View full details
These are the tall front and rear body mount posts for use on the Traxxas Summit Truck.Features: Nylon construction this is black in colorIncludes:...
View full details
Traxxas replacement front bumper and bumper mount for the Nitro Revo Monster Truck, and will fit Revo 3.3. Nylon Construction. Silver Bumper and Bl...
View full details
This is the steel suspension pin set for the Traxxas Revo. They are also commonly known as hinge pins.Features: Steel construction with a polished ...
View full details
This is the replacement starter shaft for the T-MAXX 2.5 engine.Features: Steel ConstructionIncludes: One shaftRequires: Traxxas 2.5 T-MAXX engineS...
View full details
TRA5228 Head protector, cooling head (1)/3x6mm CCS (5) (TRX 3.3)
Bulkheads (l & r) (front) (grey) Left and right front bulkhead halves Replacement part for these models: T-Maxx®
TRA4914R Body mount posts, front (2)/ body mount, rear/ body mount screw pins (4)
Connector, wiring harness (EZ-Start® and EZ-Start® 2) Replacement wiring harness for the 4570 EZ-Start® and 5270R EZ-Start® 2 system. Replacement...
View full details
6x10x12 Roller Clutch One-way starter bearing for the TRX® Pro.15 nitro engine Replacement part for these models: TRX® Pro .15
Traxxas Cap Head Machine Screw 3x32mm (6) Features: Black finish Steel construction Cap head design Includes: (6) 3X32mm cap head machine screws...
View full details
VXL-3m Electronic Speed Control, waterproof (brushless)
Screws, 3x40mm button-head machine (hex drive) (6)
Gear, 14-T pinion (48-pitch) (fits 3mm shaft)/ set screw 14-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pi...
View full details
Gear, 21-T pinion (48-pitch) / set screw 21-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full details
Servo case/gaskets (for 2056 and 2075 waterproof servos)
Suspension pin set, front & rear (hardened steel), 4x67mm (4), 3.5x48.2mm (2), 3.5x56.7mm (2)/ M3x0.5mm NL, flanged (4) The front and rear har...
View full details
This is an optional pack of four Traxxas Fender Extensions, intended for use with TRX-4 and TRX-6 Kits. Includes: (4) Fender extensions (24) 3x8...
View full details
