Traxxas Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads (fits Maxx V2 with extended chassis (352mm wheelbase))
Traxxas Body, Maxx V2 (clear, requires painting)/ window masks/ decal sheet (fits Maxx V2 with extended chassis (352mm wheelbase))
Shock shafts, hardened steel, titanium nitride coated (long) (2) These hardened steel shafts have a super tough titanium nitride coating with a mi...
View full details
This is an optional Traxxas Rustler 4x4 and Slash 4x4 LCG Chassis Red Brace Kit. This heavy-duty chassis brace fits Slash 4X4 models equipped with...
View full details
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of too...
View full details
TRA3945X 15 Tooth Heavy Duty Pinion Gear 32 Pitch Accessory part for these models: E-MaxxE-RevoSlash 4X4 UltimateSlash 4X4Stampede 4X4 VXLStampede ...
View full details
Revo 3.3 powered by stock TRX© 3.3 Racing EngineEight-Time Winner: RC Pro Series 2004-2009, ROAR 2006-2007 Extreme Power!Fueled by Passion.Where ...
View full details
This is a 3-in-1 wire harness for your LED light kit, this is made of high quality plastics and wire, makes a great accessory for the TRX-4 kit, TR...
View full details
Spider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier) Spider gear shafts (2) include space...
View full details
The Traxxas TRX-4 Complete Long Arm Lift Kit includes everything you need to properly install a massive lift under your TRX-4 including long-arm li...
View full details
TRA3045R Electronic Speed Control LaTrax Waterproof Electronic Speed Control, LaTrax, waterproof (assembled with bullet connectors)
Dual cooling fan kit (with shroud), Velineon 1200XL motor
This is replacement Progressive Rear Shock Springs for the 2WD Slash. Features: Metal construction Pink in color Includes: (2) Shock Sprin...
View full details
Shock caps, GTX shocks/ spring perch/ adjusters/ 2.5x14 CS (2) (for 2 shocks) Pair of GTX shock caps with spring perches (2), adjustment rings (2)...
View full details
These are the Traxxas Stub Axle Carriers for the LaTrax Teton Monster Truck.Features: Black colored Made of plastic For the LaTrax Teton Monster T...
View full details
Traxxas Battery Hold-Down Front/Rear 1/10 Rally VXL Features: Made of black plastic Includes: Three different pieces Fits: Traxxas Rally Traxx...
View full details
This is the Traxxas Body mounts, front & rear. This is Traxxas part number 7215Part Number: 7215 / TRA7215Fits1/16 SummitMore detail coming soo...
View full details
These are the optional pivot ball caps for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Hard anodized aluminum Replaces stock p...
View full details
Stub axle, front, steel-splined constant velocity (1) Replacement steel front stub axle for Traxxas steel CV driveshafts (6851R). Accessory part ...
View full details
This is an optional Traxxas "Short" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects o...
View full details
This is an optional Traxxas Single Motor Gear Cover, and is intended for use with the E-Revo model 5605. Traxxas makes it easy to convert from dual...
View full details
Titan® 775 High-Torque Brushed Motor The monstrous 16.8-volt Titan 775 10-turn motor is the largest brushed motor offered by Traxxas. This massive ...
View full details
This is the chassis top plate for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in color and holds receiver and th...
View full details
This is a pair of 5.9 rate (blue) shock springs for the Traxxas Revo.Features: Metal construction that’s red in color (small blue square indicates ...
View full details
Convert your Traxxas Revo to forward only with this Forward Only Conversion Kit. All parts required to convert the Revo to forward only INCLUDES: O...
View full details
Traxxas Brake Pad Set Revo Features: Aluminum construction with fiber pads pre-glued Inlcudes: Two brake pads Fits: Traxxas Revo Traxxas T-Max...
View full details
This is a set of rod ends for the Traxxas Revo. They are to be used on the rear toe-link rods only.Features: Plastic construction that’s black in c...
View full details
Replacement part for these models: Revo Accessory part for these models: Revo Summit Lightweight Aluminum Turnbuckles 30% lighter than steel, ...
View full details
TRA5334 Axle carriers, left & right (1 each)
Traxxas optional red aluminum pushrods for the rocker arms for the REVO. These go between the Rocker Arms and the Lower Suspension Arms. **Must be ...
View full details
Traxxas pair of driveshafts, outside U-joint is lubricated and sealed by a rubber boot to protect it from dirt and grime U-joint pins are held capt...
View full details
These are the replacement bulkhead cross braces for the Traxxas E-Maxx. These Braces are located in between the bumper mounts.Features: Black nylon...
View full details
Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum steering blocks improve...
View full details
Bellcrank bushings (plastic) (5x8x2.5mm) (4)
Gear, 26-T pinion (48-pitch) (fits 3mm shaft)/ set screw 26-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pi...
View full details
Traxxas Body Accessories Kit, 2017 Ford Raptor (Includes Grill, Hood Insert, Side Mirrors, & Mounting Hardware)
Designed for the ExtremeNew heavy-duty X-Maxx suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas des...
View full details
Just like the Traxxas heavy-duty suspension arms, X-Maxx green roof skid plates use our toughest composite material. Whether you’re sending it at t...
View full details
This is the replacement Rear Differential Ring Gear and Differential Pinion Gear for the Traxxas Maxx. Includes: (1) Differential Ring Gear (1)...
View full details
Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)/ screw pin (...
View full details
Ball bearings, blue rubber sealed (6x10x3mm) (2) Pair of 6x10x3 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
Push bar, bumper (chrome) (fits #8069 bumper) Give your truck a rugged new look with this chrome bumper push bar. Fits 8069-series front bumper. ...
View full details
Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)Replacement part for these models:Rustler 4X4 VXLRustler 4X4
