This is a set of optional anodized 6061-T6 aluminum toe links for use with the TRA8995 WideMaxx Suspension Kit. These toe links measure 119.8mm o...
View full details
This is an optional set of Traxxas Maxx Aluminum Steering Blocks, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. These parts hav...
View full details
Traxxas Body, E-Revo, Black/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless moun...
View full details
Driveshafts, steel constant-velocity (assembled), front or rear (4) (#8654, 8654G, or 8654R and #7758, 7758G, or 7758R required for a complete set...
View full details
Wheel hubs, splined, 17mm (green-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm green-anodized aluminum wheel hubs combine high-profi...
View full details
Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2) Machined from tough 6061-T6 aluminum, these wheelie bar ...
View full details
Spare tire mount/ mounting bracket/ spare tire cover/ mounting hardware Replica spare tire for the TRX-4® 1979 Ford® Bronco body. Includes mount, ...
View full details
Bumper, front/ bumper support Replacement front bumper with bumper support Replacement part for these models: Rustler® 4X4 Brushless Rustler® 4X...
View full details
Input shaft, transmission (cush drive) Transmission (Cush Drive) input shaft Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ul...
View full details
This is the Aluminum Hex Wheel Hubs for the Traxxas X-Maxx Monster Truck. Features: Replaces Stock Plastic Wheel Hexes Blue in Color Aluminum C...
View full details
This is the replacement Differential Gasket/ X-Rings for the Traxxas E-Revo VXL Brushless. Includes: Differential Gasket X-Rings (2) 12.2x18x0.5 M...
View full details
This is a pair of Traxxas pre-assembled rims and tires, the 3.8" 6 spoke wheels have a 17mm splined hex and the Talon EXT tires are pre-glued to th...
View full details
Tires, Canyon Trail 4.6x1.9" (S1 compound)/ foam inserts (2) Canyon Trail 1.9″ x 4.6″ tires feature deep tread blocks for maximum traction on roug...
View full details
Ball bearings, black rubber sealed (4x10x4mm) (2) Pair of 4x10x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is the Side Mirrors, Snorkel, and Mounting Hardware for the TRX-4 #8011 body (not included). Includes: (1) Left Mirro (1) Right Mirror Sno...
View full details
This is a set of two optional Pink Aluminum Stub Axle Carriers with bearings from Traxxas. These stub axle carriers mount to the rear control arms,...
View full details
This is a replacement Traxxas X-Maxx 13 Tooth Front Differential Pinion Gear. Features:Factory Replacement Part Includes:(1) Front Differential Pin...
View full details
Sold out
Feratures:One-piece molded composite plastic constructionHolds the differential, skidplate and lower control arm assemblies Includes:Lower Rear Bul...
View full details
These are the Traxxas Assembled Glued Slick Tires and 12-Spoke Blue Wheels for the LaTrax Rally Car.Features: Black and Blue colored Premounted sl...
View full details
Traxxas 7529 Latrax Servo Mount/Servo HornThis is the Servo Mount/Servo Horn for the Latrax Rally Car from Traxxas.FEATURESPlastic constructionServ...
View full details
This is a replacement Traxxas Gear Cover, and is intended for use with the Traxxas 1/10 Rally. Features:Factory Replacement Gear Cover Includes:(1...
View full details
This is the Traxxas pair of White GTR Long Spring Shocks with an Orange Compression Rating, 0.623 (2). These Spring Shocks fit the Traxxas Slash 4x...
View full details
These are the left or right half shafts for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction that’s black in colorIncludes: ...
View full details
This is the Traxxas pair of Composite GTR Shocks for the Traxxas Rally VXL.Features: Black in color Composite construction Fully assembled - with ...
View full details
This is the Traxxas Front and Rear Bumper for use on the Traxxas 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Fro...
View full details
This is the rear suspension arm set for use on the Traxxas 1/16 Slash VXL 4WD RTR.Features: Nylon construction that is black in colorIncludes: Low...
View full details
These are the hollow balls for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black in colorIncludes: T...
View full details
This is the Traxxas set of four 12mm Blue Anodized Aluminum Hex Wheel Adapters. With Traxxas’ new hex wheel adapters it’s now possible to add the s...
View full details
This is a pair of Rear Progressive Rate White Shock Springs forthe Traxxas Slash 4x4 Vehicles. Features White in colorSteel constructionProgressive...
View full details
This is a replacement Traxxas Differential Output Shaft Set, and is intended for use with the Traxxas XO-1 1/7 Scale vehicle. This replacement work...
View full details
This is the rear suspension arm guards for the Stampede and Slash 4x4.Features: Black plastic constructionIncludes: Two Rear suspension arm guards...
View full details
TRA6715 Stampede 4X4 Body Mount (1)/ Body Mount post (2) (front) Replacement part for these models: Stampede 4X4 Unassembled Kit Stampede 4x4 VX...
View full details
This is the optional tall battery hold down retainer for the Traxxas XO-1 on-road car.Features: Allows the installation of taller multi-cell batter...
View full details
This is a set of two Traxxas Standard Compound Kumho Venture MT Tires, Pre-Mounted on SCT Split-Spoke Wheels. This tire set is intended for use on ...
View full details
This is a set of two Traxxas Standard Compound Kumho Venture MT Tires, Pre-Mounted on SCT Split-Spoke Wheels. This tire set is intended for use on ...
View full details
Springs, front (white) (progressive rate) (2) Pair of white progressive-rate springs for Traxxas long Ultra Shocks are custom-wound to provide res...
View full details
This is the gray Nylon chassis for the 2WD Traxxas Slash.Features: Gray composite nylon constructionIncludes: One chassis for the Traxxas SlashRequ...
View full details
This is a pair of assembled and glued tires and wheels for the Traxxas Summit.Features: Canyon AT tires with angular lugs Geode chrome plated plas...
View full details
Traxxas motor mount is constructed of silver aluminum. Replaces damaged motor mount. Requires: Motor Mount Hinge Post Specs:Length: 58.2mm (2.29")W...
View full details
These are Traxxas 32 Pitch Hardened Steel Pinion Gears. These gears are used for various Traxxas models and feature 5mm Bore center hole, compatibl...
View full details
This is the front bumper and mount for the Traxxas Summit.Features: Black plastic with mounting hardwareIncludes: Front bumper and mountRequires: I...
View full details
This is a pair of Red 4.4 Rate Black GTR shock springs from Traxxas. The springs use high-quality spring steel with durable powder-coated finishes....
View full details
Traxxas replacement center wing mount for the optional Traxxas Revo series wing mount set. Constructed of black composite nylon. Replaces a worn or...
View full details
Traxxas primary forward and reverse gears for the Traxxas T-Maxx 3.3. Gears are constructed of steel and plastic. This package includes;One Plasti...
View full details
TRA5360 Engine mount (complete assembly)/ 3x28mm CS with washers (2)/ 3x10 CS with washers (10)
FEATURES: Plastic construction Black in color INCLUDES: One Air Filter Housing One Foam Insert Element One Rubber Filter Base One Cable Tie SPECS: ...
View full details
