TRA5143 Turnbuckles, toe links (5.0mm steel) (rear) (2)
TRAXXAS
These are the rear turnbuckles/toe links for the Traxxas 3.3 T-Maxx.Features: Constructed of steel in a polished natural finishIncludes: Two Rear T...
View full detailsThese are the rear turnbuckles/toe links for the Traxxas 3.3 T-Maxx.Features: Constructed of steel in a polished natural finishIncludes: Two Rear T...
View full detailsThese are the front turnbuckles/toe links for the Traxxas 3.3 T-Maxx.Features: Constructed of steel in a polished natural finishIncludes: Two Front...
View full detailsThis is a forward only shaft and gear for the Traxxas T-Maxx. This converts the T-Maxx to forward only.Features: Black and white in colorIncludes: ...
View full detailsTraxxas stock replacement differential gear set for the T-Maxx. Stock Replacement Diff Gear Set for the Traxxas T/E Maxx. These gears can also be r...
View full detailsThese are the wheelie bar wheels for the Traxxas 3.3 T-Maxx.Features: Constructed of hard plastic Axles constructed of steel Includes: Four wheel...
View full detailsThis is the shock tower for the all versions of the Traxxas T-Maxx. This is for rectangular body posts.Features: Plastic constructionIncludes: Shoc...
View full detailsThis is a package of 3X20mm Flat Head Countersunk Hex Screws by Traxxas.FEATURES:Flat head countersunk screw with a hexagon drive insertINCLUDES:Si...
View full detailsFeatures: Black plastic, slipper clutch style spur gear Includes: one 72 tooth spur gear Technical Specifications: Tooth: 72Pitch: 32
This is a replacement fuel tank for the Traxxas Nitro Rustler Stadium truck kitFeatures:Clear plastic, flip-top style tank for glow fuel only.Nippl...
View full detailsFlywheel (N. Rustler/Sport/Stampede/T-Maxx/Revo/Jato/Slayer) Replacement part for these models: Nitro Rustler® Revo® T-Maxx® TRX® 2.5R TRX® 3.3 T...
View full detailsTraxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full detailsThis is the replacement battery hold down set for the Traxxas E-Maxx.Features: Black nylon construction Adhesive backed foam strips Fits standard ...
View full detailsThis is a replacement Traxxas ESC/Receiver Mounting Plate, intended for use with the installation of the Traxxas XL-5 or XL-10 Electronic Speed Con...
View full detailsTurnbuckles (62mm) (front tie rods) (2) Pair of 62 mm turnbuckles (front tie rods) Replacement part for these models: Bigfoot® Officially Licens...
View full detailsWiring harness, on-board radio system (includes on/off switch and charge jack) (Jato)
EVX-2 Electronic Speed Control (land version, low-voltage detection, fwd/rev)
Big-bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (2) Set of two long Big Bore shocks p...
View full detailsTires & wheels(Tracer 2.2" chrome wheels,Anaconda 2.2" tires with foam inserts)
Turnbuckles, aluminum (red-anodized), toe links, 61mm (2)(assembled with rod ends & hollow balls) (fits Stampede) (requires 5mm aluminum wrench...
View full detailsCarriers, stub axle (red-anodized 6061-T6 aluminum)(rear)(2)
Turnbuckles (54mm) (2)/ 3x6x4mm aluminum spacers (rear camber links)
Gear, 18-T pinion (48-pitch) / set screw 18-Tooth Pinion Gear (48-Pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full detailsTRA9517G Traxxas Wing/ wing washer (green)
TRA9542 Traxxas Suspension pins, outer, front, 3.5x48.2mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)
TRA9579R Traxxas Ring gear, differential/ pinion gear, differential (machined) (front or rear)
Suspension pins, lower, inner (front or rear), 4x64mm (2) (hardened steel) Pair of 4x64 mm hardened steel inner lower suspension pins. Fits front ...
View full detailsThis is a replacement Traxxas Maxx Roof Skid Plate, intended for use with the Traxxas Maxx kit. This skid plate is made from plastic material and a...
View full detailsTraxxas Body, Maxx V2, blue (painted, decals applied) (fits Maxx V2 with extended chassis (352mm wheelbase))
This is a wheelie bar with Mount for the Traxxas Drag Slash Features: Plastic Included: (1) Wheelie Bar with Mount
Stub axle, aluminum (black-anodized) (1) (for use only with #7750X or 7896 driveshaft) Add a touch of style to your X-Maxx® or XRT® with this br...
View full detailsTraxxas E-Revo 2.0 Heavy Duty Push Rod Rod Ends. These are replacements for E-Revo 2.0 models equipped with TRA8619, TRA8619G, TRA8619R or TRA8619X...
View full detailsThis is a pack of two optional Traxxas Front Heavy Duty Machined Axle Shafts for use with the TRX4 series. These heavy duty axle shafts are used in...
View full detailsWheelie bar The Rustler 4X4 wheelie bar helps prevent backflips under full-throttle acceleration. Replacement part for these models: Rustler® 4X...
View full detailsM3x27mm Bhcs Button Head Cap Screws (6)
This is a replacement Traxxas E-Revo VXL 2.0 Roof Skid Plate, with four included 3x12mm Cap Head screws. Features: Factory Replacement Part Nylon...
View full detailsThese are the Traxxas Unlimited Desert Racer Rear Axle Housing, Supports and Hubs.Stock Replacement OnUnlimited Desert Racer (UDR)
Ball bearings, blue rubber sealed (12x21x5mm) (2) Pair of 12x21x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime o...
View full detailsThis is a replacement Traxxas E-Revo 2.0 Driveshaft Rebuild Kit. This kit includes two barrels and two pins, enough parts to service two driveshaft...
View full detailsThis is a pair of Traxxas Steel front Constant Velocity Driveshafts, much stronger and smoother than stock, makes a great upgrade for the Ford GT, ...
View full detailsThis is a pair of Traxxas Steel Rear Constant Velocity Driveshafts, much stronger and smoother than stock, makes a great upgrade for the Ford GT, M...
View full detailsTraxxas TRX-4 Pre-Mounted Canyon Trail 1.9 Crawler Tires. These are premounted on black TRX-4 Wheels. The 1.9 Canyon Trail S1 compound tires and tu...
View full detailsRebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters) The GTS shock rebuild kit includes the ...
View full detailsPortal drive input gear, rear Rear portal drive input gear Replacement part for these models: TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS