Screw pin, 3x11mm (with threadlock) (6) Set of six 3x11 mm screw pins with threadlock and hex-drive heads Replacement part for these models: Unl...
View full details
Just like the Traxxas heavy-duty suspension arms, X-Maxx orange roof skid plates use our toughest composite material. Whether you’re sending it at ...
View full details
This is a replacement Traxxas Maxx Differential Output Yoke, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. This differential out...
View full details
This is a replacement Traxxas GT-Maxx Shock Caps, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. This pack includes spring perch,...
View full details
LED light harness, rock lights, TRX-6™ (requires #8026X for complete rock light set) Traxxas LED Rock Lights install directly into the inner fende...
View full details
This is a Traxxas Link Set with 5x117mm Steering Link, 5x60mm Draglink, and a 5x63mm Panhard Link for the TRX-4 Scale and Trail Crawler. These li...
View full details
New Deep-Terrain Treads extend the all-terrain dominance of Traxx-equipped vehicles to extreme surface conditions like deep snow, sand, and mud. T...
View full details
This is a pack of two optional Traxxas Rear Heavy Duty Machined Axle Shafts for use with the TRX4 series. These heavy duty axle shafts are used i...
View full details
This is a set of optional anodized 6061-T6 aluminum toe links for use with the TRA8995 WideMaxx Suspension Kit. These toe links measure 119.8mm or...
View full details
This is an optional set of Traxxas Maxx Aluminum Steering Blocks, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. These parts hav...
View full details
This is an optional set of Traxxas Maxx Aluminum Caster Blocks, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. These parts have ...
View full details
This is an orange WideMaxx suspension kit by Traxxas. Includes Front and rear suspension arms Front toe links Rear shock springs
This is a green WideMaxx suspension kit by Traxxas. Includes Front and rear suspension arms Front toe links Rear shock springs
Traxxas TRX-4 Tactical Unit Pre-Painted Body. The Tactical Unit’s lightweight night-camo body lowers the overall center of gravity (CG) of the truc...
View full details
Long Arm Lift Kit, TRX-4®, complete (includes red powder coated links, red-anodized shocks) The Traxxas Long Arm Lift Kit raises your TRX-4® to ac...
View full details
This is a pair of Traxxas pre-assembled rims and tires, the 3.8" 6 spoke wheels have a 17mm splined hex and the Talon EXT tires are pre-glued to th...
View full details
This is a pack of six replacement Traxxas 3x35mm Cap Head Hex Screws. Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash...
View full details
Yokes, transmission (2)/ 4x15mm screw pins (2) Pair of replacement transmission yokes with 4x15 mm screw pins (2) Replacement part for these mode...
View full details
This is a replacement Traxxas E-Revo 2.0 Stub Axle. Features:Factory Replacement Part Includes:(1) Stub Axle
This is a replacement Traxxas Rear Upper and Lower Bulkhead Set, for use with the TRA8622 Chassis only. This set includes the upper and lower bulkh...
View full details
TRA7793 Housing, Cush Drive (front & rear halves)
This is a replacement differential ring and pinion gear set for the Traxxas TRX-4. Package contains one ring gear and one pinion gear. Features:F...
View full details
This is the Traxxas Ford Mustang, painted in black, with decals applied. This is a replacement body for the Traxxas Mustang GT # TRA83044-4 or a gr...
View full details
This is the 24-Tooth High Range Metal Output Gear for the Traxxas TRX-4. and TRX-6 Features: Metal in Construction Includes: (1) Output Ge...
View full details
Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x10 screw pin (1)/ cross pin (black) ...
View full details
Axle housing, intermediate (TRX-6™) or rear (TRX-4®) Replacement rear or intermediate axle housing Replacement part for these models: TRX-4® 197...
View full details
This is a replacement Traxxas TRX-4 Land Rover Defender Front and Rear Inner Fender Brace Set.
This is a pack of four replacement Traxxas TRX-4 Bumper D-Rings with mounting screws. Features: Factory Replacement Bumper D-Rings Red in Color I...
View full details
This is a pack of two replacement Traxxas 4-Tec 2.0 1.9" Response X-Tra Wide Rear Tires Pre-Assembled on Black Chrome Split-Spoke Wheels. These whe...
View full details
Traxxas Body Mount Rear/Body Mount Posts, Front (2) Features: Plastic construction Includes: One-piece Rear and two-piece Front Body Mounts Fit...
View full details
This is the Chassis for the Traxxas RTR Funny Car, TRAD69**.FEATURES:Constructed of plastic with black chrome finishINCLUDES:Left and Right Chassis...
View full details
Traxxas middle drive belt is a direct fit replacement part. This belt only works with the Nitro 4-Tec, not the electric version. Includes: One midd...
View full details
Traxxas front body mounting post set is constructed of plastic and black in color. Bottom of Mounting Posts feature a square base that inserts into...
View full details
This new, light weight, silver anodized machined aluminum flywheel is 40mm in diameter, perfect for using a starter box with the Revo & Slayer....
View full details
This is the Crankshaft w/IPS for the Traxxas 3.3racing engine with starter, TRAG5407.FEATURES:Steel ConstructionIPS (Integrated Pilot Shaft)INCLUDE...
View full details
This is a pair of Shock Springs for theLaTrax Teton Monster Truck from Traxxas, TRAD76**.FEATURES:Steel construction, black in colorFits front and ...
View full details
This is an optional LaTrax Oil Filled Shock Set. These shocks feature the ability to hold oil for improved performance. This allows the user to tun...
View full details
This is a pair of differential lockers from Traxxas. Ensure that your wheels are all turning at the same speed to prevent unnecessary wheelspin whe...
View full details
This is the Power Supply for the LED Light Kitfor the 1/16 scale Traxxas Summit.FEATURES:3V, 0.5 amp power outputINCLUDES:Power Supply with Traxxas...
View full details
Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks) The GTR shock rebuild kit ...
View full details
These are the optional aluminum pushrods for use on the Traxxas 1/16 scale Slash vehicles.Features: Aluminum construction that’s in a anodized red ...
View full details
This is the optional aluminum motor mount plate for the Traxxas Slash 4x4.Features: 6061-T6 aluminum construction that’s anodized blue in colorIncl...
View full details
This is a set of two Traxxas Progressive Rate Rear Shock Springs, and are intended for use with the Traxxas Slash 4x4. The Slash 4X4’s fully adjust...
View full details
Traxxas Spur Gear 32P 50T Features: Black plastic construction Includes: 32P 50T Spur Gear for the Slash 4x4 Specs: Pitch: 32P Teeth: 50T Par...
View full details
This is a optional Traxxas Aluminum Steering Block Set, and is intended for use with the Traxxas Slash 4x4 truck. Precision-machined for total stee...
View full details
These are the Traxxas Maxx 2.8 Tires and Wheels with Foam Inserts for the Stampede 4x4. Features: Black and silver colored Made of tough material ...
View full details
This is the Traxxas Battery Door for the TQi Transmitter.Features: Grey colored Made of plastic Fits two and four channel TQi transmitters Protect...
View full details
This is the telemetry trigger magnet for the Traxxas TQi telemetry system.Features: 5x2mm round magnetIncludes: Telemetry Trigger Magnet for the Tr...
View full details