TRA4886 GEAR 2nd 37T STANDARD
TRAXXAS
This is the 2nd Gear for the 2-speed for the Nitro 4-Tec.FEATURES:Black nylon colorINCLUDES:One gear 37 Teeth
This is the 2nd Gear for the 2-speed for the Nitro 4-Tec.FEATURES:Black nylon colorINCLUDES:One gear 37 Teeth
This is a 48-pitch 84-tooth spur gear from Traxxas. The gear is molded from black plastic. This spur gear is for use with Traxxas' slipper clutch.I...
View full detailsThis is a 48 pitch 78 tooth spur gear from traxxas. The gear is molded fromwhite plastic. This spur gear is for use with Traxxas' slipper clutch.In...
View full detailsO-ring set: for carb base/ air filter adapter/high-speed needle (2)/ low-speed spray bar (2) Replacement part for these models: TRX® Pro .15 TRX®...
View full detailsDust boot, throttle Replacement part for these models: TRX® Pro .15 TRX® Pro .15 Marine
Gasket, back plate Replacement part for these models: TRX® Pro .15 TRX® Pro .15 Marine
This is the Replacement Output Shaft for the Traxxas E-Maxx Truck. The drive dog carrier rides on this shaft.
This is the Shift Fork-Shaft Assembly with Seal for the Traxxas E-Maxx Off-Road Truck.This Shift Fork fits into the transmission and over the Drive...
View full detailsThis is the 1st Speed Output Gear 36T for the Traxxas E-Maxx Truck.This gear is located in the gearbox.FEATURES:White nylon constructionINCLUDES:On...
View full detailsTurnbuckles, titanium 94mm (front tie rods) (2)/ billet aluminum wrench
These are the Left and Right Steering Blocksused on the NHRA Funny Car Race Replica from Traxxas, TRAD69**.FEATURES:Plastic construction, black in ...
View full detailsTraxxas rear shock tower replaces damaged shock towers. Constructed of hardened plastic. Two mounting holes per side for different damping rates. I...
View full detailsThis is the replacement tie-rod set for the Traxxas 4-Tec. This set includes steering and camber links.Features: Black nylon rod ends and Steel stu...
View full detailsTraxxas Gearbox Halves Front/Rear Features: Holds all gears including the 2speed gear set and input shaft Gray in color, constructed of hardened p...
View full detailsInput shaft/ drive gear assembly, lightweight (18/ 13-tooth top gear) (hard-anodized/PTFE-coated 7075 T6 aluminum gears)
This is a Traxxas Engine Mount with Screws for the Nitro 4-Tec. Note:Compatible with the TRX 2.5R, TRX 3.3, and TRX Pro .15 engines
Traxxas left and right rear suspension arms are constructed of black plastic. Includes: Two suspension arms. Specs: Length: 62.0mm (2.443")Width: 3...
View full detailsThis is the replacement recoil string for use with the Traxxas 2.5/2.5R recoil starters.Features: Direct replacement Nylon construction Includes:...
View full detailsCarburetor, Pro (complete, assembled for TRX Pro.15) (6.0mm bore) combine with cooling head (4032) to upgrade TRX .15 to Pro .15 performance. Repl...
View full detailsThis is the front bumper and mount for the Traxxas 1/16 scale Rally VXL.Features: Black plastic constructionIncludes: One Mount and BumperRequires:...
View full detailsTraxxas Wheel Adapter Features: Allow the use of Aftermarket Wheels to be Used. Includes: Four Wheel Adapters Part Compatibility: Traxxas Nit...
View full detailsThis is a slipper pressure plate and hub for the Traxxas X-Maxx Monster Truck. Features: Cast metal construction Installs on transmission input sh...
View full detailsFEATURESHardened steel constructionSplined to hold the pressure plate, slipper clutch and spur gearassemblies in place INCLUDESTransmission Input S...
View full detailsThese are the optional wheel nut washers for the LaTrax Teton Monster Truck from Traxxas.Features: Green colored Made of aluminum For the LaTrax T...
View full detailsThese are the optional wheel nut washers for the LaTrax Teton Monster Truck from Traxxas.Features: Blue colored Made of aluminum For the LaTrax Te...
View full detailsThis is the Long Chassis for the Traxxas 1/18 LaTrax Desert Prerunner. Includes: (1) Chassis
These are the Traxxas Assembled Glued Slick Tires and 12-Spoke Wheels for the LaTrax Rally Car.Features: White and Black colored Premounted slick ...
View full detailsThis is the Traxxas Camber rods, 2-degree/3-degree (6 each). This is Traxxas part number 7539Part Number: 7539 / TRA7539FitsLaTrax Rally
Traxxas 7522 Latrax Rally ChassisThis is the Chassis for the Latrax Rally Car from Traxxas.FEATURESMolded fiber composite constructionINCLUDESChass...
View full detailsThis is the brand new Traxxas Blue Painted 1/18 Rally Body with Decals for the LaTrax Rally Car.Features: Blue Colored Made of lexan Decals includ...
View full detailsThis is the Green Body for the Latrax Rally Car from Traxxas, TRAD90GG.FEATURES:Molded polycarbonate constructionTrimmed and painted with green, wh...
View full detailsThis is the Traxxas pair of White GTR XX-Long Spring Shocks with an Orange Compression Rating, 0.711 (2). These Spring Shocks fit the Traxxas Slash...
View full detailsThis is the Traxxas pair of Nerf Bars for the 1/10 scale Rally VXL, (2).Features: Black colored Made of plastic For the Traxxas Rally VXL Include...
View full detailsThis is a pair of Canyon AT 2.2" Tires with foam inserts mounted on Geode Chrome, Blue Beadlock Wheels from Traxxas. Features: Canyon AT tires ...
View full detailsThis is a set of four Traxxas Molded Composite Push Rods in Green with eight Hollow Balls. Note:Fits the following models:1/16 E-Revo VXL1/16 E-Rev...
View full detailsThese are the pushrods and hollow balls for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Molded composite construction that’s red in colorI...
View full detailsTraxxas shock bodies for use on the GTR Shocks. Constructed of black molded composite material.Requires: Installing all shock components into shock...
View full detailsTraxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and articulation.The U-joint pins are held captive by a h...
View full detailsThis is the Seal Kit for the Traxxas 1/16 scale Receiver Boxused in the 1/16 scale E-Revo and Slash. Features Prevents moisture and dirt from enter...
View full detailsThis is a pair of SCT Split Spoke Wheels in Black from Traxxas.FEATURES:Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slas...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS