Battery, Series 3 Power Cell, 3300mAh (NiMH, 6-C flat, 7.2V) Traxxas 3000-series Power Cell NiMH battery packs provide excellent run times and “...
View full details
Gear, 23-T pinion (48-pitch) (fits 3mm shaft)/ set screw 23-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pi...
View full details
TRA5042 Traxxas Oil, differential (1M weight) (standard)
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)Extreme heavy-duty steel CV (constant velocity) driveshafts for the Traxxa...
View full details
Servo horn, steering, metal/ 3x14 BCS (1) Replacement steel servo horn for TRX-4® and TRX-6® models. Replacement part for these models: TRX-4® 1...
View full details
Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768 or #7768R) Heavy-d...
View full details
Carburetor, complete (minus air filter assy.) (TRX® 2.5, 2.5R, 3.3 composite slide) The complete slide carburetor comes fully assembled and ready ...
View full details
This is a differential gear set for the Traxxas X-Maxx Monster Truck. Features: Hardened steel construction Includes:2x Output Gears4x Spider Gea...
View full details
These are the pivot balls and pivot ball caps for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Steel constructed pivot balls wit...
View full details
This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3. >FEATURES: Steel construction Silver in color Ç INCLUDES: Two 59mm screw pins ...
View full details
This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.Includes: One 70 tooth gearFeatures: Tough nylon construction Drilled fo...
View full details
Steering bellcranks (L&R)/ draglink Left and right steering bellcranks with drag link
Body, Rustler® (clear, requires painting)/window, lights decal sheet/ wing and aluminum hardware From mild to wild, Traxxas clear bodies are your ...
View full details
Traxxas Shock Tower Front Features: Made from black molded nylon For the Traxxas Stampede Specs: Height: 2 3/4" Thickness: 1/4" Width at base: 2...
View full details
This is a set of two optional blue aluminum steering blocks with ball bearings from Traxxas. These steering blocks mount the the front uprights, an...
View full details
Shock shafts, steel, chrome finish (xx-long) (2) Replacement XX-long steel shock shafts with chrome finish for Traxxas Ultra Shocks (2). Replacem...
View full details
Screws, 3x23mm button-head machine (hex drive) (6) 3x23 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Bulkhead (front) (black) Black composite front bulkhead Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica Bigfoot® O...
View full details
This is a pair of Traxxas GTR Assembled XX-Long Shocks (Without Springs) in Green for the Slash 4x4 Ultimate. These shocks feature PTFE-coated bodi...
View full details
Tailgate protector/ 3x8mm flathead screw (4) The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added dur...
View full details
This is a set of replacement Traxxas Differential And Transmission Yokes with Hardware , and are intended for use with the Traxxas 1/16 Slash, and ...
View full details
IF NOT IN STOCK REORDER RPM73162 OR RPM73165 OR RPM73164 OR RPM73169 These are the left and right axle carriers for use on the Traxxas 1/16 ...
View full details
Spur gear, 54-tooth (1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas...
View full details
Air filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ Revo® air filter base (angled)/wire mount/hardware (1 each) (TRX® Eng...
View full details
This is a 28-tooth 48-pitch replacement pinion gear for the Traxxas 4-Tec.Features: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD ...
View full details
Battery expansion kit (allows for installation of taller multi-cell battery packs) (Rustler®, Bandit, Stampede®) The battery expansion kit allows ...
View full details
Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right) Upgrade your standard r...
View full details
This Traxxas Stainless Screw Kits is 100% complete. Your new kit will include everything needed to do a full conversion on a TRX-4. Stainless Steel...
View full details
This is a Traxxas Rock n' Roll body that is painted with decals applied for the X-Maxx vehicle. This body comes assembled with tailgate protector.
Traxxas Mounted Wheelie Bar Tires/Wheels Blue (2) Features: Machined blue aluminum ball bearing equipped wheels Rubber Tires Includes: Two rubbe...
View full details
TRA5117A Ball bearings, black rubber sealed (6x12x4mm) (2)
Features: Clear molded polycarbonate construction Trimmed out wheel arches and body post holes Includes: Latrax Teton Clear Body with Decal Sheet...
View full details
These are the front and rear center half shafts for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.Features: Nylon construction that’s black...
View full details
Traxxas' TQi 2.4GHz 2-Channel Radio System boasts a full range of tuning features; long-range, 2-channel versatility, high-output, 2.4GHz signal, a...
View full details
Rod ends (12)/ hollow balls (12) Set of twelve rod ends come assembled with hollow balls Replacement part for these models: Drag Slash 1967 Chev...
View full details
This is a pack of replacement shock rebuild parts for the GTR shocks (either the stock ones or the hard anodized ones). Included are shock bladders...
View full details
Suspension arms, left & right Replacement left & right suspension arms Replacement part for these models: BIGFOOT® No. 1 Officially Li...
View full details
Caster blocks, 30-degree, red-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2) Red aluminum 30° caster blocks improve the a...
View full details
Suspension arms (front) (2) Black front suspension arms (L&R) Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica ...
View full details
Fenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ body mount/ 3x8 flat-head screws (4)/ 2.5x6 CS (10) Narr...
View full details
Traxxas Cush Drive Housing. Package includes one front half and one rear half. Features:Nylon Construction Includes:(1) Front Half(1) Rear Half
O-ring and seal set, carburetor/ O-rings: 2x1mm (3), 10x1mm (4), 2.5x1.15mm (2), 6.2x1.2mm (1)/ 5x.9mm O-ring installation tool/ 5.3x7.8x.6mm crus...
View full details
This is the optional clear body for the Traxxas X-Maxx Monster Truck.Features: Molded from clear polycarbonate plastic Allows X-Maxx drivers to cr...
View full details
This is the front bulkhead for the Traxxas Slash 4x4.Features: Composite plastic construction that is black in color Fastens to front of chassis a...
View full details
This is the Traxxas Front/Rear Body Mount for the Slash 4x4.Features: Black colored For the Traxxas Slash 4x4 Hardened plastic construction Inclu...
View full details
This is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL.Features: Composite construction Allows installation of taller multi-cell ...
View full details