This is the motor and pinion gear for the Traxxas EZ Start 2 (R) System.Features: Pre-installed 10 tooth pinion gearIncludes: Motor and Pinion Gear...
View full details
Screws, 3x15mm cap-head machine (hex drive) (6) 3x15 mm cap-head machine screws with hex drive heads. Set of six. Replacement part for these mode...
View full details
Traxxas Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
This is a pair of Fully Assembled (without springs) Long Green-Anodized GTR Shocks from Traxxas. Features: Hard Anodized PTFE Aluminum Bodies T...
View full details
Spur gear, 45-tooth (32-pitch) 45-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing...
View full details
Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are th...
View full details
This is the battery compartment door and vents for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black...
View full details
This is the Traxxas auto-detectable temperature sensor.Features: Only for use with the Traxxas Telemetry ExpanderIncludes: Auto-Detectable Temperat...
View full details
This is the Replacement O-ring header gasket for the Traxxas 2.5 Engine.This is located on the header of the engine.FEATURES:Red silicone construct...
View full details
Lead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector) Replacement...
View full details
Traxxas updated wire harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. Extra...
View full details
Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks) Aluminum shock caps are great way to boost the durability and style of any Traxx...
View full details
Ultra Shocks (black) (long) (complete w/ spring pre-load spacers & springs) (front) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a ...
View full details
Screws, 3x6mm cap-head machine (hex drive) (6)
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) Set of replacement rod ends with 16 long ends and 4 short ends. Inc...
View full details
Rustler 4X4 LED Light Kit Built Traxxas Tough™The Traxxas Rustler® 4X4 takes stadium truck performance to new heights. The all-new High-Output Off...
View full details
Steering blocks, left & right Left and right steering blocks Replacement part for these models: Maxx® Slash® Maxx®
Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo) The stiffer heavy-duty servo saver spring and steel stee...
View full details
This is the Traxxas Ring gear, differential/ pinion gear, differential (metal). This is Traxxas part number 7683Part Number: 7683 / TRA7683FitsLaTr...
View full details
Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1) Replacement gear cover with motor mount hinge post a...
View full details
Spur gear, 55-tooth 55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full details
Traxxas 48 Pitch Spur Gears are available in 45, 50 or 55 tooth count options to fine tune the gear ratio of your model. Fits: Traxxas 1/16 E-Revo...
View full details
This is the input shaft for use on the Traxxas Slash 4x4 vehicles.Features: Steel construction that is black in colorIncludes: Input Shaft Bearing...
View full details
This is a package of replacement caster spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels.Features: Black nylon constru...
View full details
Tires & wheels, assembled, glued (2.8") (All-Star chrome wheels, Alias® tires, foam inserts) (electric rear) (2) Alias® step-pin tires provide...
View full details
Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls) 59 mm (78 mm center to center) adjustable toe l...
View full details
Camber link set (plastic / non-adjustable ) ( front & rear) (gray) Non-adjustable gray composite camber link set includes front and rear links...
View full details
Screws, 3x10mm cap-head machine (6) (no washer)
Screws, 3x30mm button-head machine (hex drive) (6) 3x30 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Gear, 19-T pinion (48-pitch) / set screw 19-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full details
Fuel line (610mm or 2ft) 24" fuel line Replacement part for these models: Jato® Nitro Rustler® Nitro Slash Revo® Slayer® Pro 4X4 T-Maxx® Access...
View full details
Carriers, stub axle (left & right) (requires 20x32x7 ball bearings) Left and right stub axle carriers. Required 20x32x7 bearings. Replacemen...
View full details
Traxxas Premium Shock Oil (20 wt) Traxxas premium 20 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silico...
View full details
Traxxas X-Maxx Rear Body Support. Package includes replacement rear body support and hardware. Includes: Rear body Support (2) 3x15mm CS (2) 3x1...
View full details
This is a Traxxas LED front bumper light bar for the TRX-4 sport body. Requires: TRA8028 Power Supply Accessory part for these models: TRX-4 1979 ...
View full details
Traxxas Rustler 4X4 Rear Bumper. Package includes replacement rear bumper and mount components. Features:Factory Replacement Bumper Components Incl...
View full details
This is a set of eight Traxxas Heavy Duty Toe Link Rod Ends with pre-installed hollow balls ready for installation on the E-Revo VXL Brushless.
Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 16X23.5X.5 TW Differential carrier includes X-ring gaskets (2), ring gear gasket, and...
View full details
This is a replacement Traxxas X-Maxx Hardened Steel Shock Mount Suspension Pin Set, including two 4x25mm and two 4x38mm pins. For use in the front ...
View full details
This is a replacement LaTrax Camber and Toe Link Set. This set includes four camber links and two toe links. Features:Factory Replacement Camber an...
View full details
Differential kit, center (complete) The optional center differential transfers power to the front and rear differentials independently for smooth ...
View full details
These are the optional 17mm splined wheel hubs for the T-Maxx 3.3 4WD Nitro Monster Truck RTR.Features: Aluminum construction that’s blue anodized...
View full details
This is the optional 36 tooth spur gear for the Traxxas Revo monster truck. This spur gear goes on the gear box to transfer power from the clutch b...
View full details
This is a 4x10mm button head screw set for the Traxxas Revo vehicle.Features: Steel construction that’s black in color Low-profile, button-head de...
View full details
These are the 4x16mm Button Head Machine Screws from Traxxas.Features: For use in the Traxxas Revo and also anywhere a screw this size is required...
View full details
Screws, 3x14mm button-head machine (hex drive) (6) 3x14 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
This is a Traxxas LED roof light bar for the TRX-4 sport body. Requires: TRA8028 Power Supply Replacement part for this model: TRX-4 Equipped with ...
View full details