LED lights, power supply (regulated, 3V, 0.5-amp)/ 3-in-1 wire harness The waterproof LED power supply plugs directly into the accessory tap on ...
View full details
Ball bearings, black rubber sealed (12x18x4mm) (2) Pair of 12x18x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal...
View full details
This is a Traxxas front and rear Skidplate.Features: Molded composite plastic construction and reduces damage to underside of chassis and other com...
View full details
Differential output yokes, heavy duty (2)/ screw pin (2) Pair of heavy-duty differential output yokes with screw pins (2)
Pipe coupler, molded (for use with pipes 5152 (T-Maxx®) & 4452R) (TRX® 2.5, 2.5R, 3.3) Blue pipe coupler for use with pipes 5152 and 4452R exh...
View full details
This is a set of 2 Traxxas 15x24x5mm Rubber Sealed Ball Bearings in Blue.Features: Steel construction with blue rubber seals Used in the front and...
View full details
Bottle, fuel filler (500cc) The fuel bottle holds 500 cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and...
View full details
This is the optional 40 tooth spur gear for the Traxxas Revo monster truck. This spur gear goes on the gear box to transfer power from the clutch b...
View full details
Gear, 16-T pinion (48-pitch) / set screw 16-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full details
LaTrax Alias Quad-RotorReady-To-Fly Helicopter 2.4GHz radio system Quad-rotor thrust with auto-leveling 6-axis flight system Four high-output ...
View full details
The BL-2s brushless power system delivers more speed, faster acceleration, and virtually maintenance-free operation at an affordable price. Drivers...
View full details
The Traxxas Pro Scale Advanced Lighting Control System w/Power Module & Distribution is a great way to add scale realistic lights to you TRX-...
View full details
6400mah 11.1v 3-Cell 25C LiPo Battery Traxxas Certified iD®-equipped LiPo batteries provide the punch and on-demand power to reach the top spee...
View full details
Wheel hubs, splined, 17mm (blue-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm blue-anodized aluminum wheel hubs combine high-profile...
View full details
This is the Traxxas GTR Hard Anodized XX-Long Shocks with Titanium Shafts.Features: Black colored TiN coated shafts Bodies made of alumnum Includ...
View full details
Driveshaft assembly (1) left or right (fully assembled, ready to install)/ 3x10mm screw pin (1) The fully-assembled driveshaft comes complete and ...
View full details
This is the rear bulkhead for use on the Traxxas 1/16 E-Revo and Slash vehicles.Features: Nylon construction that’s black in colorIncludes: Two Re...
View full details
This is a package of 6 threadlocked grubs (4mm) from Traxxas.Features: Threadlocking compound pre-applied Hardened steel construction Designed for...
View full details
These are the 3x6mm flathead machine screws used on the Traxxas T-Maxx 3.3 RTR.Features: Constructed of steel that’s black in colorIncludes: Six 3x...
View full details
This is an optional Traxxas Clear Body, and is intended for use with the Traxxas Stampede 1/10 truck. Package includes clear, pre-trimmed body and ...
View full details
*** if sold out order LOSB5971 **** Ball bearing, black rubber sealed (20x32x7mm) (2) Pair of 20x32x7 mm black rubber seal ball bearings. A ste...
View full details
Differential kit, center (complete) (aluminum carrier) Replace your Traxxas vehicle’s stock slipper clutch with this Pro-Built high-performance ce...
View full details
Traxxas Skid Plate Set 1/16 E-Revo/Slash VXL Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Slash Traxxas 1/16 Rally Traxxas 1/16 Summit Traxxas 1...
View full details
Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4) Suspension pin set includes 2x46 mm (2) and 2x14 mm (4) suspension pins. Fits front or ...
View full details
Drive hub, center, rear (1)/ 4x3 GS (1) Rear center drive hub with 4x3 mm grub screw Replacement part for these models: Ford Fiesta® ST Rally Fo...
View full details
This is the front heavy duty stub axles for the Stampede 4x4 from Traxxas.Features: Plastic and steel constructionIncludes: 2 Stub axlesRequires: I...
View full details
This is a replacement Traxxas Rear Bulkhead, and is intended for use with the Traxxas Slash 4x4 short course truck in addition to other Traxxas veh...
View full details
These are replacement slipper friction pegs for all of the Traxxas kits that have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...
View full details
Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2) Black differential output yokes (2) with 3x5 mm screws (2) and s...
View full details
This is the glow plug lead wire for the T-Maxx truck kit. This wire is attached to the glow plug that heats it while starting.Features: This is a ...
View full details
This is a pack of two replacement Traxxas 55mm Toe Link Turnbuckles. These adjustable turnbuckles come assembled with rod ends and pillow balls.
Shock tower (rear) Replacement rear shock tower Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replic...
View full details
Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2) Sealed receiver box for Traxxas micro receivers. Includes foam pad, silicone seal...
View full details
Battery, Series 3 Power Cell, 3300mAh (NiMH, 6-C flat, 7.2V) Traxxas 3000-series Power Cell NiMH battery packs provide excellent run times and “...
View full details
Gear, 23-T pinion (48-pitch) (fits 3mm shaft)/ set screw 23-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pi...
View full details
TRX-4M Light Bar Kit Blaze a path to your next adventure with the TRX-4M™ LED Light Bar kit. The kit adds ultra-bright forward lighting with additi...
View full details