Filters
Accessories
Brand
Capacity
Component
Level
Model
Part Type
Parts Category
Sensored
Type
Voltage
ALL TRAXXAS
TRA5554 Suspension down stop screws (includes 2.5mm drill bit) (limits suspension droop, sets maximum ride height)
TRAXXAS
This is a set of four Traxxas Suspension Down Stop Screws with a 2.5mm Drill Bit for the Jato. All R/C off-road racers want as much ground clearanc...
View full detailsTRA5550 Half shaft set, left or right
TRAXXAS
Traxxas set of assembled left or right half shafts are direct replacement parts. Rubber sealed boots. Fully assembled Includes: Two assembled half ...
View full detailsTRA5536 Caster blocks, 25-degree (left & right)/ steering blocks, 25degree (left & right
TRAXXAS
Traxxas Left/Right Caster & Steering Blocks 25 Deg Jato Features: Nylon construction Black in color Includes: One Left and Right 25° Caster ...
View full detailsTRA5532X Caster blocks, 30-degree, titanium-anodized 6061-T6 aluminum (left & right)
TRAXXAS
These are optional Left and Right 30 Degree Caster Blocksfor the Traxxas Jato.FEATURES:Silver Titanium-anodized 6061-t6 aluminum30-degreeINCLUDES:O...
View full detailsTRA5529X Ball studs, aluminum, hard-anodized, PTFE-coated (for inner camb
TRAXXAS
This is a package of Threaded Ball Studs fromTraxxas for use on the Jato 2.5.These are used for the inner camber link mounting.FEATURES:Hard anodiz...
View full detailsTRA5522 Chassis, 6061-T6 aluminum (3mm) (anodized blue)/ adhesive foam pad (1)
TRAXXAS
Features: Anodized Blue in Color 6061 T6 Aluminum Construction Countersunk Screw Holes Includes: One Blue Aluminum Chassis
TRA5520 Bumper, rear (for use with mid-mounted RX battery)
TRAXXAS
This is the Rear Bumperfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Plastic constructionBlack in colorINCLUDES:One Rear Bumper.
TRA5512 Wing mounting hardware, (4x8mmCCS (aluminum)(3)/ 4x7mm flanged NL (3))
TRAXXAS
This is the Wing Mount Hardware for the Traxxas Jato.FEATURES:Nylon flanged tapered nuts.Blue anodized aluminum countersunk cap head screws.INCLUDE...
View full detailsTRA5495 Linkage, front sway bar (Revo/Slayer) (3x70mm turnbuckle) (2) (assembled with rod ends, hollow balls and ball stud)
TRAXXAS
This is the replacement Sway Bar Linkage Front for the optionalTraxxas Revo/Revo 3.3 sway bar kit - TRAC5598.FEATURES:Nylon and metal constructionB...
View full detailsTRA5467 Body, GTR shock (molded composite) (2)
TRAXXAS
These are the GTR Shock Bodiesfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Nylon constructionGray in colorMolded Composite INCLUDES:Two Molded...
View full detailsTRA5466 Body, GTR shock (aluminum) (1)
TRAXXAS
This is a replacement GTR shock body for the Traxxas Revo monster trucks. This is the stock shock body that comes in the kit.
TRA5433A Spring, shock (red) (GTR) (1.4 rate double pink stripe).
TRAXXAS
This is a pair of Traxxas 1.4 Rate (Double Pink) GTR Shock Springs in Red for the Jato and XO-1. Traxxas offers a wide variety of spring rates for ...
View full detailsTRA5432 Spring, shock (white) (GTR) (front) (1.3 rate gold) (1 pair)
TRAXXAS
TRA5432 Spring, shock (white) (GTR) (front) (1.3 rate gold) (1 pair)
TRA5431 Spring, shock (white) (GTR) (rear) (1.2 rate silver) (1 pair)
TRAXXAS
This is the super shock spring 1.2 Silver for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s white in color Silver weigh...
View full detailsTRA5429 Spring, shock (white) (GTR) (rear) (1.0 rate tan) (1 pair)
TRAXXAS
This is the Super Shock Spring 1.0 Tanfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Metal constructionWhite in ColorTan Weight Rating 1.0INCLUD...
View full detailsTRA5427 Spring, shock (white) (GTR) (front 0.7 yellow) (1 pair)
TRAXXAS
This is the super shock spring 0.7 Yellow for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s white in color Yellow Weigh...
View full detailsTRA5418 Linkage set, rear brake (Revo) (Includes: brake lever/rod (wire)/ brake spring/ brake adjustment dial/ rod guide bushing/ screw collar)
TRAXXAS
This is the optional linkage set for the rear brake assembly on the Traxxas Revo 3.3 monster trucks. If you install the optional center differen...
View full detailsTRA5395X Reverse installation kit (includes all components to add mechanical reverse (no Optidrive) to Revo) (includes 2060 sub-micro servo)
TRAXXAS
Traxxas reverse kit adds mechanical reverse to the Revo. All mechanical reverse components including the #2060 sub-micro servo and illustrated inst...
View full detailsTRA5389X Shift fork/ shaft
TRAXXAS
This is a Shift Fork/Shaft for the Traxxas Revo.FEATURES:Plastic shift fork constructionMetal shift fork shaftShift fork plastic is black in colorP...
View full detailsTRA5388 Brake cam (1)/ sleeve (1)
TRAXXAS
FEATURES: Aluminum brake cam construction Plastic brake sleeve construction INCLUDES: One brake cam Part #5388 One plastic sleeve Part #5388 SPECS:...
View full detailsTRA5377 Gear, idler/ idler gear support/ bearing (pressed in)
TRAXXAS
Traxxas idler gear with bearing and support for the Revo. These parts install inside the transmission. Steel idler gear construction Plastic idler ...
View full detailsTRA5375 Tires, Response Pro 3.8"
TRAXXAS
This is a set of Response Pro 3.8" Short Knobby DesignTires with Foam Inserts by Traxxas.FEATURES:Soft rubber compound designed for racingDirection...
View full detailsTRA5373 Wheels, Hurricane 3.8" (chrome) (2) (also fits Maxx series)
TRAXXAS
Traxxas set of the Hurricane Chrome Wheels used on the Traxxas Revo. Five spoke chrome plated construction. Also fits Traxxas T-and E-Maxx vehicles...
View full detailsTRA5372X Wheels, Gemini 3.8" (black chrome) (2)
TRAXXAS
Traxxas set of 17mm Gemini Chrome Wheels used on the Revo. Also fits Traxxas T-and E-Maxx vehicles, use with 17mm splined wheel hubs & nuts, pa...
View full detailsTRA5371 Wheels, dished 3.8" (white) (2)
TRAXXAS
This is a pair of dished 3.8 wheels in white from Traxxas.Features: White in color Designed for use with 17mm Splined Wheel Hubs and Nuts Include...
View full detailsTRA5370 Tires, Talon 3.8" (2)/ foam inserts (2)
TRAXXAS
Traxxas Talon Tires with foam inserts .Used on the Traxxas Revo. Soft compound treaded rubber, low profile design. Also included are foam inserts t...
View full detailsTRA5355X Hollow ball set, aluminum (30)/ tall centered hollow ball (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)
TRAXXAS
Traxxas package of thirty aluminum hollow balls for the Revo.Constructed of gun metal gray colored aluminum.Two tall offset aluminum hollow balls a...
View full detailsTRA5339 Insert, threaded steel (replacement inserts for Tubes) (includes (1) left and (1) right threaded insert)
TRAXXAS
TRA5339 Insert, threaded steel (replacement inserts for Tubes) (includes (1) left and (1) right threaded insert)
TRA5327 Suspension arms, adjustable wheelbase right side (upper arm (1)/ lower arm (1))
TRAXXAS
Suspension Arms, Right: Revo, Revo 3.3 This is the Upper and Lower Right Suspension Arm Set used in theRevo Adjustable Suspension Arm Set, TRAC534...
View full detailsTRA5323R Bulkhead tie bars, front & rear (red-anodized aluminum)
TRAXXAS
These are the front and rear red aluminum bulkhead tie bars for the Revo from Traxxas.Features: Blue anodized aluminum (2.5mm thick)Includes: One f...
View full detailsTRA5296 Fitting, inlet for pipe pressure (90-degree)(1)
TRAXXAS
Traxxas 90º pressure fitting is constructed of polished aluminum and threaded at one end. This is the pressure fitting that is used on the Tuned Pi...
View full detailsTRA5172X Wheels, SS (split spoke) 3.8"
TRAXXAS
Split Spoke Wheels, Chrome 3.8": Revo, TMX This is a set of optional Split Spoke 3.8" Chrome Wheels for theTraxxas Revo,T-Maxx and E-Maxx. Features...
View full detailsTRA5169 Screws, 2.6x8mm countersunk machine (6)
TRAXXAS
This is a package of flat head countersunk machine screws from Traxxas.Features: Silver metal construction Flat head Phillips drive Includes: Six...
View full detailsTRA5146 Hanger, metal (T-Maxx/S-Maxx) (TRX 2.5, 2.5R)
TRAXXAS
TRA5146 Hanger, metal (T-Maxx/S-Maxx) (TRX 2.5, 2.5R)
TRA5141A Toe links, Maxx (Tubes black-anodized, 7075-T6 aluminum) (112mm, front) (2)
TRAXXAS
These are the optional lightweight 112mm toe links with rod ends for the Traxxas Maxx models.Features: 30% lighter than stock steel toe links 4 ti...
View full detailsTRA5127 Stub axle (1) (Jato) (for steel constant-velocity driveshaft)
TRAXXAS
TRA5127 Stub axle (1) (Jato) (for steel constant-velocity driveshaft)
TRA4998 Output gear assembly, reverse (26-T)
TRAXXAS
This is the 26 tooth Reverse Output Gear Assembly for the Traxxas T-Maxx4WD Radio Control Monster Truck.This reverse output gear installs on the ou...
View full detailsTRA4992 Drive gear, two-speed (17/22-teeth)/ slipper shaft
TRAXXAS
FEATURES: Replaces damaged or worn 2-speed drive gearsGears are constructed of plastic and pre-installed on steel shaft INCLUDES: One 17 and 22 too...
View full detailsTRA4988 Drive hub assembly, clutch/ 6x8.5x0.5mm PTFE-coated washer (1)
TRAXXAS
This is the Replacement Drive Hub Assembly for the Traxxas T-Maxx 4WD Radio Control Monster Truck.This drive hub assembly fits into the spur gear a...
View full detailsTRA4987 Rings, retainer (snap rings) (14mm) (2)
TRAXXAS
This is the Replacement Pair of 14mm Snap Rings for the Gear Hub Assembly on the Traxxas T-Maxx 4WD Radio Control Monster Truck. These are extra sn...
View full detailsTRA4984 Spur gear, 43-T (1st speed)
TRAXXAS
This is the Replacement 43 Tooth 1st Speed Spur Gear for the Traxxas T-Maxx4WD Radio Control Monster Truck.This spur gear is installed in the trans...
View full detailsTRA4973 Tires, Maxx 3.8" (6.3" outer diameter (160mm)) (2)
TRAXXAS
Features: Fits all Traxxas vehicles in the Revo and Maxx seriesIncludes: Two 3.8 Tires and foam insertsRequires: Installing on wheels with Tire Glu...
View full details