TRA4431A Upper chassis deck (grey), composite
TRAXXAS
This is the grey chassis upper deck for the Traxxas Nitro Rustler. It supports the steering servo and strengthens the upper chassis area.Features: ...
View full detailsThis is the grey chassis upper deck for the Traxxas Nitro Rustler. It supports the steering servo and strengthens the upper chassis area.Features: ...
View full detailsFEATURES: Black nylon construction INCLUDES: One tank box REQUIRES: Nothing. This is a direct replacement part. SPECS: Length: 88mm (3.47")Width: 1...
View full detailsTraxxas fuel tank box, servo holder is constructed of gray nylon. Specs: Length: 88mm (3.47")Width: 101mm (3.98")Height: 28mm (1.10")
This is the Receiver Cover for theTraxxas Nitro Slash Short Course Racing Truck,FEATURES:Plastic constructionFastens to chassis and fits over recei...
View full detailsThis is the Draglink with Screws Set from Traxxas.FEATURES:Durably molded draglink.The metal screws have a phillips drive insert.Replacement steeri...
View full detailsTRA4445 Fuel tank vibration cushion, rubber
This is the Traxxas Rubber Vibration Cushion for the 150cc Fuel Tank on the Nitro Slash.Features: Made of rubber For the Traxxas Nitro Slash Incl...
View full detailsThis is a replacement fuel tank for the Traxxas Nitro Rustler Stadium truck kitFeatures:Clear plastic, flip-top style tank for glow fuel only.Nippl...
View full detailsThis is the fuel tank rebuild kit for the Traxxas Rustler.Features: Direct fit replacement partsIncludes: Tank cap Tank seal Tank cap spring Small...
View full detailsThis is the rubber exhaust pipe for the Traxxas Nitro Rustler.Includes: One rubber pipeFeatures: Durable black rubber constructionSpecs:Length: 3-5...
View full detailsThis is a pre-assembled tuned pipe for the Traxxas Rustler.Features: Plastic Construction Pre-Installed Pressure Tap and Wire Mount 90 Degree Rubb...
View full detailsThis is the Plastic Tuned Pipe for use with the Traxxas 2.5 and 2.5R engine equipped vehicles.FEATURES:Black plastic constructionDirect replacem...
View full detailsFeatures:Made of 2mm thick wire, ends are prebent to attach to tuned pipe and chassis.Includes:One Pipe Hanger for the Traxxas Nitro Rustler and Ni...
View full detailsTraxxas Springs Rear Rustler (2) Features: Metal Construction Black in color Includes: Two Shock Springs Specs: Length, uncompressed: 80mm (3...
View full detailsFeatures:Painted whiteSteel construction Includes:Two springs Technical Specifications:Length: 3.11" (79mm)Inside diameter: .61" (15mm)Outside diam...
View full detailsTraxxas aluminum engine mounting set is constructed of aluminum. Hex drives and Phillips drive. This set has all of hardware to assemble the engine...
View full detailsThis is the Composite Brake Disc for the Traxxas Nitro Slash SC, TRAD77**.FEATURES:Replaces worn brake discsINCLUDES:Brake DiscSteel Adapter
This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.Includes: One 70 tooth gearFeatures: Tough nylon construction Drilled fo...
View full detailsThis is the replacement 32-pitch 72-tooth spur gear with bushing for the Traxxas Nitro Rustler and Nitro T-Maxx trucks.Features: Black plastic, sli...
View full detailsFeatures: Black plastic, slipper clutch style spur gear Includes: one 72 tooth spur gear Technical Specifications: Tooth: 72Pitch: 32
Traxxas replacement throttle and brake rod set has pre-bent wires ready for assembly. Features solid steel construction. The diameter of the wire i...
View full detailsThis is the Traxxas throttle and brake rods for a slide carb.Features: Steel construction Black plastic servo horn Includes: Throttle and brake r...
View full detailsThis is the Traxxas Exhaust Header Set for the Nitro Rustler.This Exhaust Set bolts to the exhaust outlet of the engineand connects to the coupler ...
View full detailsThis is a stock replacement part for the Traxxas Nitro Rustler (not theelectric version).Features: Steel top gear shaft with preinstalled 16 tooth ...
View full detailsThis is a replacement Traxxas Receiver Cover, and is intended for use with the Traxxas Nitro Sport 1/10 Scale Nitro Truck.
FEATURES: Constructed of aluminum. INCLUDES: One Traxxas Exhaust Header Set for the Nitro 4-Tec and the Nitro Sport with: One Pipe Two 3mm x 25mm S...
View full detailsTraxxas easy start Starting System for Nitro Vehicles using the Traxxas TRX and TRX PRO Engines such as NITRO SPORT, NITRO RUSTLER, NITRO STAMPEDE,...
View full detailsTraxxas replacement gears and shafts for the EZ-Start System. Steel main gear. Nylon and nylon/metal gears. Metal gear shafts. INCLUDED: One 29T St...
View full detailsTraxxas stock replacement EZ start motor has a pre-installed pinion. Positive end is identified. This motor is what turns the engine over in order ...
View full detailsConnector, wiring harness (EZ-Start® and EZ-Start® 2) Replacement wiring harness for the 4570 EZ-Start® and 5270R EZ-Start® 2 system. Replacement...
View full detailsTraxxas updated wire harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. Extra...
View full detailsThis is the replacement EZ start control box for the Traxxas EZ Start. This is the box that attaches to the 6-Cell battery and controls the start o...
View full detailsThis is the glow plug lead wire for the T-Maxx truck kit. This wire is attached to the glow plug that heats it while starting.Features: This is a ...
View full detailsLead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector) Replacement...
View full detailsTRA4583 EZ-Start 2 wiring harness (for Jato)
Ball bearings (5x10x4mm) (2) (metal shielded, for clutch bell) Pair of 5x10x4 mm ball bearings Replacement part for these models: Jato® Revo® Sl...
View full detailsThis is a pair of ball bearings by Traxxas. Ball Bearings help to reduce friction on your vehicle.Features: Stainless steel construction that’s sil...
View full detailsTraxxas replacement set of 6x12x4mm ball bearings replace worn bearings and are constructed of steel. INCLUDES: Two 6x12x4mm ball bearings for the ...
View full detailsTraxxas slipper clutch set For Traxxas Vehicles which Do Not currently have the Slipper Clutch Set or Need the Current Slipper Replaced. INCLUDED: ...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS