TRA4622 Pressure rings, slipper (notched) (2)
TRAXXAS
This is a set of two replacement slipper pressure rings from Traxxas. These are metal rings with a notch in them and are installed on either side t...
View full detailsThis is a set of two replacement slipper pressure rings from Traxxas. These are metal rings with a notch in them and are installed on either side t...
View full detailsThis is a replacement slipper press plate for the Traxxas Rad2, Hawk2, Nitro Hawk, Nitro Street, TRX-T Eagle, Blue Eagle, and Blue Eagle LSII.Inclu...
View full detailsThis is a set of two replacement differential output yokes from Traxxas. These yokes attach to the differential, and the half shafts that drive the...
View full detailsDifferential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2) Black differential output yokes (2) with 3x5 mm screws (2) and s...
View full detailsDifferential output yokes, hardened steel (w/ U-joints) (2) Hardened steel differential output yokes provide extra strength for 2WD models using m...
View full detailsThese are optional big bore red shock springs for the Traxxas E-Maxx truck.Features: 2.5 lb/in tension Red coating Includes: Two Shock SpringsReq...
View full detailsSpur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch) 76-tooth spur gear (48-pitch) for Torque Control slipper clutches...
View full detailsThis is a 48 pitch 78 tooth spur gear from traxxas. The gear is molded fromwhite plastic. This spur gear is for use with Traxxas' slipper clutch.In...
View full detailsSpur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch) 83-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full detailsThis is a 48-pitch 84-tooth spur gear from Traxxas. The gear is molded from black plastic. This spur gear is for use with Traxxas' slipper clutch.I...
View full detailsThese are replacement slipper friction pegs for all of the Traxxas kits that have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...
View full detailsSpur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch) 86-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full detailsThis is a 48 pitch nylon spur gear used on the Traxxas Pro-Series transmission, such as the tranny used in the TRX-1.Features: Spur is made of nyl...
View full detailsTraxxas 48P Spur Gear (90T) Features: 48 pitch 90 tooth Designed for models with a slipper clutch Black plastic construction Includes: One spur...
View full detailsThis gear is a steel pinion gear in 48 pitch.Features: Steel pinion gearIncludes: 1 gear and 1 set screwSpecs:Pitch: 48Tooth: 25Shaft length: 3/16S...
View full detailsThis is a 28-tooth 48-pitch replacement pinion gear for the Traxxas 4-Tec.Features: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD ...
View full detailsThis is the Traxxas pair of Long Shocks. One bottle of silicone shock oil is included. Features: T-6 aluminum construction Greatly reduces piston/...
View full detailsThis is the Traxxas pair of X-Long Rear Shocks for the Traxxas Nitro Rustler. These shocks are a pre-assembled and are hard-anodized and Teflon coa...
View full detailsThis is a set of two Traxxas Pro-Trax 2.2 Rear Buggy Tires with Inserts. These tires feature a spiked tread design, and soft compound rubber constr...
View full detailsTRA4791 Tires, Pro-Trax mini-spiked 2.2" (rear) (2)
Traxxas Pro .15 to TRX 2.5 engine conversion has a tune Pipe, bellcrank, & Throttle Servo Horn made of plastic. Linkage wire made of steel. Spe...
View full detailsFEATURES: Steel Construction INCLUDES: One Gear REQUIRES: Traxxas Clutch Bell SPECS: Length: 6 mm (0.243") Diameter: 17 mm (0.675") Teeth: 15
Traxxas Clutch Gear 2nd Speed 19T Features: Steel Construction Includes: One 19 Tooth Gear Specs: # Teeth: 19T Part Compatibility: Traxxas ...
View full detailsFEATURES: Black nylon construction INCLUDES: One left chassis stiffener One right chassis stiffener REQUIRES: Installation onto vehicle. SPECS: Lef...
View full detailsBearing block, front (supports front shaft)/belt tension adjustment shims (front/ middle)/ screws
Traxxas tie-rods and upper camber rods are constructed of steel. Includes: Four Turnbuckles Two Draglinks. These turnbuckles are used on the steeri...
View full detailsTraxxas left and right rear suspension arms are constructed of black plastic. Includes: Two suspension arms. Specs: Length: 62.0mm (2.443")Width: 3...
View full detailsDriveshafts, telescopic (external-splined (2) & internal-splined (2))/ metal U-joints (4)
This is a package of 3X20mm Flat Head Countersunk Hex Screws by Traxxas.FEATURES:Flat head countersunk screw with a hexagon drive insertINCLUDES:Si...
View full detailsScrews, 3x25mm countersunk machine (hex drive) (6)
CS 3x10 flathead (hex drive) Set of four 3x10 mm flat-head machine screws with hex drive heads Replacement part for these models: 4-Tec® 2.0 AWD...
View full detailsThis is a Traxxas Engine Mount with Screws for the Nitro 4-Tec. Note:Compatible with the TRX 2.5R, TRX 3.3, and TRX Pro .15 engines
This is the Traxxas Front Drive Belt for the Nitro 4-Tec and the Nitro 4-Tec Pro touring cars.
FEATURESBlack Hard Rubber Construction6mm Width, 50 Groove HTD INCLUDESOne Rear Drive Belt REQUIREMENTSInstallation onto kit
Traxxas middle drive belt is a direct fit replacement part. This belt only works with the Nitro 4-Tec, not the electric version. Includes: One midd...
View full detailsThis is a Front Drive Belt for the Traxxas 4-Tec 3.3FEATURES:Rubber construction78 toothINCLUDES:One front drive beltSPECS:Width: .17" (4.5mm)
Traxxas rear drive belt for the Nitro 4-Tec 3.3 is made of rubber and black in color INCLUDES: One rear drive belt
Traxxas Screws 3x36mm Hex (6) Features: Metal construction Black in color Countersunk types Screw Includes: Six 3mm x 36mm Countersunk Machine S...
View full detailsThis is a set of four Traxxas Y-Spoke chrome mounted Pro-Trax on-road tires and wheels. They come with superb pre-glued racing tires with contoured...
View full detailsThis is the Differential Pulley and Side Cover for the Traxxas Nitro 4-Tec.FEATURES:Plastic constructionBlack in colorINCLUDES:One differential pul...
View full detailsThis is the 2nd Gear for the 2-speed for the Nitro 4-Tec.FEATURES:Black nylon colorINCLUDES:One gear 37 Teeth
Traxxas optional 45T spur gear is constructed of black nylon. INCLUDES: One 45T spur gear. This is listed in the manual as the 1st gear.
This is a 10x19mm ball bearing from Traxxas. It is primarily for used in the 2-speed Spur Gear on the Traxxas T-Maxx.Features: Ball bearings reduc...
View full detailsFEATURES: One way hub and E-Ring INCLUDES: One way Hub E-ring
This is a 2WD Gear Hub and Snap Ring for the Traxxas Nitro 4-Tec. COMMENTS: There are two spur gear pins molded into the gear hub. pjm 2/12/03 ir/jxs
Pulley shaft, front (blue-anodized, light-weight aluminum) Lighter than the stock steel pulley shaft, the attractive, blue-anodized 6061-T6 aluminu...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS