TRA4941 Coupler, exhaust (silicone)
TRAXXAS
This is the replacement silicone exhaust coupler for securing the tuned pipe to the header (manifold) on the Traxxas TRX 15 Engine.Features: Made ...
View full detailsThis is the replacement silicone exhaust coupler for securing the tuned pipe to the header (manifold) on the Traxxas TRX 15 Engine.Features: Made ...
View full detailsThis is a pair of replacement Steering Bellcranks for the Traxxas T/E-Maxx Monster Trucks. These bellcranks bolt to the chassis and the bellcrank p...
View full detailsTraxxas pair of aluminum bellcrank posts for the T-Maxx and E-Maxx 4WD Radio Control Monster Trucks. These bellcrank posts hold the steering bellcr...
View full detailsSteering bellcranks/ servo saver/ servo saver spring/ servo spring retainer (requires 5x11 BB (2) Steering bellcranks with servo saver, servo save...
View full detailsThis is the optional center transmission skid plate for the Traxxas T-Maxx. This piece covers the center area below the lower chassis bracesFeature...
View full detailsTraxxas updated stock replacement fuel tank is made of clear, nylon construction. Black fuel tank cap (spring loaded). This fuel tank is unique to ...
View full detailsFEATURESOutside U-joint is lubricated and sealed by a rubber boot toprotect it from dirt and grimeU-joint pins are held captive by the ball bearing...
View full detailsTraxxas heavy duty half shafts (short) for the T-Maxx 2.5. Constructed of black nylon. These come out of either side of the transmission. This pack...
View full detailsThis is a pair of stock replacement long half shafts for the Traxxas T/E-Maxx. These are the swingshaft or dogbone components of the T/E-Maxx.Featu...
View full detailsThese are the stub axles for the Traxxas 2.5 T-Maxx monster truck.Features: Features heavy duty nylon yokes for long lasting durability The steel ...
View full detailsFEATURES: Replaces missing or damaged hex wheel hubs Hubs are made of molded black plastic Axle pins are steel INCLUDES: Two Hex Wheel Hubs Two 2.5...
View full detailsHex wheel hubs, steel (2)/ axle pins (2.5x12mm) (2) 14 mm steel wheel hubs provide superior strength and durability and won't round off. Includes ...
View full detailsThese are aluminum hex wheel hubs for the T-Maxx and E-Maxx Truck kits.Features: Blue anodized Machined 6061 T-6 aluminum construction Packaged in...
View full detailsThis is the set of axle pins for the Traxxas T-Maxx 4WD RTR Monster Truck. These pins go through the stub axles on each wheel, the wheel hubs are t...
View full detailsThis is the toe link tie bar from Traxxas. It fits all Traxxas Maxx vehicles.Features: Nylon construction that is black in colorIncludes: One Toe ...
View full detailsThese are the replacement springs for the Traxxas T-Maxx. These mount to the shocks and provide the damper for the suspension.Features: Spring ste...
View full detailsTraxxas package of progressive rate shock springs are constructed of steel. White in color. Under light duty driving the progressive rate springs s...
View full detailsTraxxas fuel tank rebuild kit rebuilds worn or damaged fuel tank parts. INCLUDES: One black nylon capOne steel cap springOne 14x25mm black foam was...
View full detailsThis is a pair of 14x7.5mm Wheel Hex Hubs from Traxxas.Features: Steel construction Tall offset configuration Includes: Two 14x7.5mm wheel hex hu...
View full detailsTraxxas optional aluminum engine mount for the Traxxas Nitro T-Maxx. This is located on the chassis and supports the engine. This mount fits both t...
View full detailsFEATURES: Metal construction Pre-bent hanger wireINCLUDES: One metal hanger wire
This is the Traxxas set of X-Long Big Bore Shocks for the Traxxas T-Maxx. These shock bodies and shock caps are made of hard anodized, Teflon coate...
View full detailsThese are the chassis braces for the Traxxas New T-Maxx 3.3 4WD Nitro Monster Truck RTR.Features: Nylon construction that is black in color Replac...
View full detailsThis is the brake disc for the Traxxas T-Maxx 4WD RTR Monster Truck. This disc fits between the brake pads and fastens to the rear of the gearbox.F...
View full detailsTRA4965 Brake pads (2)/ brake piston/ 3x15mm cap hex screws (2)
This is the Brake Adapter for the Traxxas T-Maxx 4WD RTR Monster Truck.This adapter fits in the center of the brake disc and fastensto the output y...
View full detailsTraxxas optional aluminum brake adapter for the T-Maxx monster truck.; Features blue aluminum construction.; This is to be used with the heavy duty...
View full detailsFEATURES: Replaces missing or damaged brake cams Brake cam is blue aluminum Cam lever and grub screw are steel INCLUDES: One blue aluminum brake ca...
View full detailsTraxxas throttle brake linkage for the T-Maxx is an assortment of linkage wires for the Traxxas T-Maxx. These wires connect the servos to the engin...
View full detailsThis is the Shift Linkage Set for the Traxxas 3.3 T-Maxx.FEATURES:Installs on shift servo and controls shifting of the transmissionINCLUDES:Servo h...
View full detailsThis is the Transmission Skidplate for theTraxxas New T-Maxx 4WD Nitro Monster Truck RTRFEATURES:Attaches to and protects chassis and transmissionS...
View full detailsThis is the set of tires for the Traxxas T-Maxx 4WD monster truck. These tires fit on the wheels of the T-Maxx.Features: Replaces damaged or worn ...
View full detailsThis is the set of Foam Inserts for Traxxas T-Maxx 4WD RTR Monster Truck.These foam inserts fit inside each wheel adding firmness andkeeping the ti...
View full detailsFeatures: Fits all Traxxas vehicles in the Revo and Maxx seriesIncludes: Two 3.8 Tires and foam insertsRequires: Installing on wheels with Tire Glu...
View full detailsTraxxas pair of tires fit all Traxxas vehicles in the Revo and Maxx series. Five spoke chrome plated plastic wheels with premounted tires and foam ...
View full detailsWheelie Bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4) Replacement adjustable arm for Traxxas #3678 and #5472 wheelie bars. Includes 3x12 mm ...
View full detailsWheelie bar, assembled (fits all T-Maxx®/E-Maxx® trucks) The Maxx® wheelie bar has 4 snap-in adjustment positions that allow you to choose how ext...
View full detailsThese are the wheelie bar wheels for the Traxxas 3.3 T-Maxx.Features: Constructed of hard plastic Axles constructed of steel Includes: Four wheel...
View full detailsTRA4978 Screws, 3x21mm button-head machine (hex drive)
TRA4980X Housings, diff (ring side/ non-ring side) (1 each)/ pinion collar (1)
This is the ring gear and parts for the Traxxas T-Maxx 4WD Radio Control Monster Truck. These ring and pinion gears are installed in the front diff...
View full detailsThis is the optional differential spool for the Traxxas T-Maxx Truck. This is located in the bulkhead and eliminates the differential. This part is...
View full detailsTraxxas stock replacement differential gear set for the T-Maxx. Stock Replacement Diff Gear Set for the Traxxas T/E Maxx. These gears can also be r...
View full detailsThis is a pair of Traxxas Maxx tires and wheels.Features: Fits the 1/10 scale Traxxas E-Maxx, T-Maxx and Revo Wheels constructed of plastic, split...
View full detailsThis is the Replacement 43 Tooth 1st Speed Spur Gear for the Traxxas T-Maxx4WD Radio Control Monster Truck.This spur gear is installed in the trans...
View full detailsTraxxas replacement gear hub assembly for the T-Maxx 4WD Radion Control Monster Truck. This is the replacement gear hub assembly. This gear hub ass...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS