TRA2532 Tie bar, fiberglass
TRAXXAS
Tie bar, fiberglass The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installa...
View full details
Tie bar, fiberglass The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installa...
View full details
Traxxas Premium Shock Oil (50 wt) Traxxas premium 50 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silicon...
View full details
Rod ends, long (6)/ hollow ball connectors (6) Set of six long rod ends with hollow ball connectors Replacement part for these models: Bandit® B...
View full details
Sway bar kit (front and rear) (includes front and rear sway bars and adjustable linkage) Fine-tune your model for high-grip racing with this track...
View full details
Driveshafts, steel constant-velocity (assembled), front or rear (4) (for use with #8995 WideMaxx® suspension kit) (requires #8654 series 17mm spli...
View full details
FOR EXTRA BATTERY ORDER TRA2821 What’s Included MODEL 97054-1: TRX-4M Scale and Trail™ Crawler with Land Rover Defender Body: 1/18 Scale 4X...
View full details
This is a Traxxas front lower bulkhead.Features: One-piece molded composite plastic construction Holds the steering, differential, skidplate and l...
View full details
Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1) The fully-assembled driveshaft comes complete and...
View full details
Stub axles, rear (2) Set of two replacement rear stub axles Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Lic...
View full details
Battery, Power Cell, 3000mAh (NiMH, 7-C hump, 8.4V) Traxxas 3000-series Power Cell NiMH battery packs provide excellent run times and “punch” a...
View full details
Bulkhead, front (upper and lower) Front upper and lower bulkhead halves Replacement part for these models: Maxx® Slash® Maxx®
Slipper pressure plate & hub (aluminum alloy) Replacement standard-duty aluminum alloy pressure plate and hub. Use with 5552X standard-duty cl...
View full details
Air filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (use with #5266 filter body) (TRX® 2.5, 2.5R, 3.3) Pack of three ...
View full details
Housings, differential, front Front differential housing halves Replacement part for these models: Ford Fiesta® ST Rally Ford® F-150® Raptor R™ ...
View full details
XL-5 Electronic Speed Control, waterproof (land version, low-voltage detection, fwd/rev/brake)
Bulkhead (front) (grey) Gray front bulkhead Replacement part for these models: Bandit® VXL Bandit® Nitro Rustler® Nitro Slash Rustler® VXL Rustl...
View full details
Wire harness, series battery connection (compatible with Traxxas High Current Connector, NiMH only)
Traxxas Top Fuel Power Plus 33% Nitro Fuel (One Quart)
High-Torque Waterproof Servo• 80 oz-in torque• Transit time 0.23 sec/60° Replacement part for these models: Bandit® BIGFOOT® No. 1...
View full details
Traxxas 7730 X-Maxx Right Lower Suspension Arm This is a replacement Traxxas X-Maxx Right Lower Suspension Arm. Features: Factory Replacement Part...
View full details
Tires & wheels, assembled, glued (X-Maxx® black wheels, paddle tires, foam inserts) (left & right) (2) X-Maxx® paddle tires offer unbeatab...
View full details
MODEL 107154-1 Mini Maxx: Maxx-scale monster truck, fully assembled, Ready-To-Race®, with TQ™ 2.4 GHz radio system, Bl-2s™ Brushless Power Syste...
View full details
Traxxas Premium Shock Oil (60 wt) Traxxas premium 60 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silico...
View full details
Shock tower, front (left & right halves) Front shock tower halves Replacement part for these models: X-Maxx® Ultimate X-Maxx®
This is a replacement LaTrax 3.7V 650mAh 1C LiPo battery pack for use on the La Trax Alias quad-copter. Specifications: Length: 2.08" (53mm) Width:...
View full details
Driveshaft assembly, front or rear (2) Set of two driveshaft assemblies fit front or rear Replacement part for these models: 1/18 LaTrax® Desert...
View full details
Traxxas optional center differential kit for use on the 1/16 E-Revo and Slash Vehicles. Constructed of black nylon. The optional center differentia...
View full details
Velineon 3500 Brushless Motor The Velineon® 3500 kV brushless motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a...
View full details
MODEL 92076-4: TRX-4 Scale and Trail® crawler with Ford® Bronco body: 1/10 scale 4X4 trail truck, fully-assembled, waterproof electronics, Rea...
View full details
This is a Traxxas 61-Tooth Spur Gear factory replacement for the 1/18 scale LaTrax Desert PreRunner and LaTrax Teton. Includes: 1 61 tooth spur gear
Screws, 3x6mm button-head machine (hex drive) (6) 3x6 mm button-head machine screws with hex drive heads. Set of six.
Silicone diaphragms (4) Silicone diaphragms (4) Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 Brushless AWD Chassis 4-Tec...
View full details
Gear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 18-tooth pinion gear (1.0 metric pitch) fits...
View full details
Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect s...
View full details
MODEL 76054-5: 1/18 LaTrax Teton, fully assembled, Ready-To-Explore™, with 2.4 GHz radio system, 370 motor, waterproof, all-weather electron...
View full details
Top drive gear, steel (22-tooth) Replacement 22-tooth steel top drive gear for standard Magnum 272 transmission Replacement part for these models...
View full details
Pinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear) Heavy-duty 11-tooth rear differential pin...
View full details
This is a replacement Traxxas X-Maxx Left Lower Suspension Arm. Features: Factory Replacement Part Nylon Construction Includes:(1) Left Lower Sus...
View full details
Suspension pin retainer (4) Set of four replacement suspension pin retainers for hardened steel suspension pins. Replacement part for these model...
View full details
Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2) 58 mm camber links come assembled with rod ends and hollow balls. ...
View full details
Shoulder screws, Ultra Shocks (3x12 hex drive) (6) Set of six 3x12 mm shoulder screws (shock attachment screws) with hex-drive heads. Replacement...
View full details
This is a rear bumper for the Traxxas X-Maxx Monster Truck. Shield your vehicle from the damages of an impact from behind with this rear bumper.Fea...
View full details
The Velineon® VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles. ...
View full details
This is a replacement 11-tooth heavy duty front differential pinion gear for the Traxxas X-Maxx. Designed for use with 35-tooth heavy duty ring gea...
View full details
Drive cup (1)/ 3x8mm CS (for use only with #7750X driveshaft) X-Maxx® drive cup with 3x8 mm set screw. For use with 8s-spec heavy duty driveshaft ...
View full details
Heat sink, Velineon® 380 brushless motor, aluminum (blue-anodized) Add the blue-anodized aluminum heat sink to your Velineon 380 brushless motor t...
View full details
Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft/ diff carrier support) Differential gear set include output gears (2...
View full details
FEATURESSteel construction, white in colorDab of paint on end of spring indicates compression rateINCLUDESTwo Long 0.892 Blue Rate GTR Shock Spring...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS