![TRA7796 Center Drive, Torque Biasing](http://www.bigboyswithcooltoys.ca/cdn/shop/products/download_63_8c7b51cf-b80c-4da4-a44d-faf62aab4537_512x.jpg?v=1676406031)
TRA7796 Center Drive, Torque Biasing
TRAXXAS
This is the Torque Biasing Center Drive and Ball Bearings for the Traxxas X-Maxx. Features Improves Driveline Durability Drives Larger Module ...
View full detailsThis is the Torque Biasing Center Drive and Ball Bearings for the Traxxas X-Maxx. Features Improves Driveline Durability Drives Larger Module ...
View full detailsWheel hubs, splined, 17mm (red-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile l...
View full detailsTraxxas Rubber Tires Wheelie Bar Wheels (2) Features: Constructed of rubber, black in color with with "TRAXXAS" written in white on the sidewalls ...
View full detailsThis is the Traxxas Unlimited Desert Racer Lower Left Suspension Arm with Insert and Pre-Installed Hollow Ball.Stock Replacement OnUnlimited Desert...
View full detailsTraxxas Wrist Pin/Clips (2) TRX 3.3 Fits: Traxxas TRX 3.3
Accessory part for these models: Bigfoot© No. 1 Officially Licensed Replica Bigfoot© Officially Licensed Replica Ford F-150 Raptor Nitro Slash Ru...
View full detailsThis is the Traxxas X-Maxx Replacement Center Skidplate.Features Molded composite plastic construction Reduces damage to underside of chassis and ...
View full detailsThis is a set of Traxxas Box/Receiver/Wire Cover/Foam Pads.Features: Molded composite plastic receiver box with rubber plug Fastens to chassis to ...
View full detailsThis is the Traxxas caster steering block for the LaTrax.Features: Made of black plastic Includes: Two caster hubs (C-hubs) and two steering blo...
View full detailsSprings, front (progressive, +20% rate, blue) (2) Pair of long progressive-rate springs are custom-wound to provide responsive control over small ...
View full detailsSHOCK TOWER, FRONT Replacement front shock tower Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Rally Slash 4X4 Ultim...
View full detailsGEAR, 34-T PINION (1.0 METRIC PITCH), FITS 5MM SHAFT
This is a replacement Differential part set, intended for use with the Traxxas Summit Monster Truck. Includes: Heavy Duty Differential Carrier (1)...
View full detailsThis is the CV style stub axle for use on the Traxxas Summit Truck RTR.Features: Machined steel construction that’s CV styleIncludes: CV Style Stu...
View full detailsThis is the brake disc for the Traxxas Nitro Jato Stadium Truck.Features: Composite construction that’s grey in colorIncludes: One Composite Brake ...
View full detailsThis is the replacement fuel tank cap O-rings for the Traxxas Revo model.Features: Rubber construction that’s orange in colorIncludes: Two rubber O...
View full detailsSuspension arms upper (1)/ suspension arm lower (1) (right front) Upper and lower front right suspension arms Replacement part for these models: ...
View full detailsNuts, 5mm nylon locking (8) Replacement part for these models: Jato® Nitro Rustler® Revo® Slayer® Pro 4X4 T-Maxx®
These are plastic washers from Traxxas. This will work of the Nitro Rustler.Features: Plastic constructionIncludes: Ten WashersRequires: Traxxas Ni...
View full detailsScrews, 3x25mm button-head machine (hex drive) (6)
Screws, 4x12mm countersunk machine (100-degree) (6)
Screws, 4x18mm countersunk machine (hex drive) (6)
Spur gear, 50-tooth (machined, hardened steel) (wide face, 1.0 metric pitch) 50-tooth spur gear (1.0 metric pitch) is machined from hardened steel...
View full detailsTraxxas Skid Plate, Front (1), Rear (1)/ Rubber Impact Cushion (1)
Suspension pins, outer, rear, 3.5x56.7mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2) Two 3.5x56.7 mm hardened steel outer rear suspension pins ...
View full detailsThis is a LED Light Set. You must have the TRA8090 light kit to completely install this product. This lighting kit is compatible with the Scale and...
View full detailsWheel hubs, splined, 17mm (orange-anodized) (4)/ 4x5mm GS (4)/ 3x14mm pin (4) Set of four 17 mm orange-anodized aluminum wheel hubs combine high-...
View full detailsGear, 19-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 19-tooth (32-pitch) pinion gear is mach...
View full detailsThis is a replacement Traxxas Center Driveshaft in blue anodized aluminum. Features: Blue Anodized Finish Aluminum Construction Light Weight Incl...
View full detailsThis Skid Plate Set is a replacement part for The Traxxas E-Revo VXL and fits #8629 and #8630 Bulkheads. Features:Factory Replacement Skid Plate Se...
View full detailsThis is a replacement Traxxas X-Maxx Aluminum Stub Axle. This anodized aluminum stub axle is for use with 8s-spec heavy duty driveshaft (TRA7750X) ...
View full detailsThis is a replacement Traxxas Front Driveshaft for the 4-Tec 2.0.
This is the Traxxas X-Maxx Green Aluminum Motor Mount Washer and Screw Set. This set includes four washers and four screws.FitsX-Maxx 6SX-Maxx 8S
This is a pack of two replacement Traxxas 4-Tec 2.0 Steering Blocks. Features:Factory Replacement Part Includes:(2) Steering Blocks
Nuts, 4mm flanged nylon locking, serrated (black) (10) Set of ten black flanged nylon locking nuts Replacement part for these models: 4-Tec® 2.0...
View full detailsThis is a pack of two replacement Traxxas 4-Tec 2.0 Rear Driveshafts.
This is a pair of Traxxas Pinion Gear Differentials for the LaTrax Rally Car.Features: Black colored Made of plastic For the LaTrax Rally Car Inc...
View full detailsThis is the pair of two Traxxas Front/Rear Aluminum Driveshaft Assembly for the LaTrax Rally Car.Features: Blue colored Made of Aluminum replaces ...
View full detailsBULKHEAD, REAR Rear bulkhead for vehicles equipped with the low-CG 4X4 chassis. Does not fit standard chassis. For a complete chassis conversion, ...
View full detailsThis is an optional Traxxas Aluminum Finned Motor Mount. Aluminum is great at dissipating heat making this mount a must have for any hot running mo...
View full detailsTraxxas Steering Linkage 3x20mm Turnbuckle Fits: Traxxas Slash 4x4 Traxxas Stampede 4x4
Bulkhead tie bars, front & rear, aluminum (blue-anodized) Set of front and rear bulkhead tie bars with a brilliant blue anodized finish Repla...
View full detailsTRA6757 Rebuild kit, steel-splined constant-velocity driveshafts
This is the stock Battery Hold Down for the Traxxas Stampede 4x4 VXL. Features Composite constructionHolds stock 7-cell battery supplied with vehic...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
MISSISSAUGA LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS