This is the Traxxas GTR Hard Anodized XX-Long Shocks with Titanium Shafts.Features: Black colored TiN coated shafts Bodies made of alumnum Includ...
View full details
This is a set of 2 Traxxas 15x24x5mm Rubber Sealed Ball Bearings in Blue.Features: Steel construction with blue rubber seals Used in the front and...
View full details
These are replacement slipper friction pegs for all of the Traxxas kits that have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...
View full details
This is the glow plug lead wire for the T-Maxx truck kit. This wire is attached to the glow plug that heats it while starting.Features: This is a ...
View full details
These are the 3x6mm flathead machine screws used on the Traxxas T-Maxx 3.3 RTR.Features: Constructed of steel that’s black in colorIncludes: Six 3x...
View full details
This is a set of two optional blue aluminum steering blocks with ball bearings from Traxxas. These steering blocks mount the the front uprights, an...
View full details
TRX-4® Deep-Terrain Traxx® Traction Redefined All-terrain Traxx with Deep-Terrain Treads provides the most significant traction upgrade you can ma...
View full details
Wheel hubs, splined, 17mm (blue-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm blue-anodized aluminum wheel hubs combine high-profile...
View full details
Ball bearings, black rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is a Traxxas 61-Tooth Spur Gear factory replacement for the 1/18 scale LaTrax Desert PreRunner and LaTrax Teton. Includes: 1 61 tooth spur gear
This is a replacement Traxxas Rear Differential Housing, and is intended for use with the Traxxas Slash 4x4 short course truck. Features: Nylon Co...
View full details
This is the front heavy duty stub axles for the Stampede 4x4 from Traxxas.Features: Plastic and steel constructionIncludes: 2 Stub axlesRequires: I...
View full details
This is a replacement Traxxas Rear Bulkhead, and is intended for use with the Traxxas Slash 4x4 short course truck in addition to other Traxxas veh...
View full details
Control box (complete) (EZ-Start® 2) Replacement starter control box for the EZ-Start® 2 starter. Replacement part for these models: Jato® Nitro...
View full details
Pipe coupler, molded (for use with pipes 5152 (T-Maxx®) & 4452R) (TRX® 2.5, 2.5R, 3.3) Blue pipe coupler for use with pipes 5152 and 4452R exh...
View full details
This is a package of 6 threadlocked grubs (4mm) from Traxxas.Features: Threadlocking compound pre-applied Hardened steel construction Designed for...
View full details
Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right) Upgrade your standard r...
View full details
Roll bar (assembled with LED lights)/ mounts (front (2), rear (left & right))/ 2.6x12mm BCS (self-tapping) (4) (fits #9212 or 9230 series bodi...
View full details
This Traxxas Stainless Screw Kits is 100% complete. Your new kit will include everything needed to do a full conversion on a TRX-4. Stainless Steel...
View full details
Tailgate protector/ 3x8mm flathead screw (4) The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added dur...
View full details
This is a differential gear set for the Traxxas X-Maxx Monster Truck. Features: Hardened steel construction Includes:2x Output Gears4x Spider Gea...
View full details
This is a pair of 173mm molded composite plastic toe links for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction S...
View full details
Driveshaft assembly (1) left or right (fully assembled, ready to install)/ 3x10mm screw pin (1) The fully-assembled driveshaft comes complete and ...
View full details
Traxxas Skid Plate Set 1/16 E-Revo/Slash VXL Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Slash Traxxas 1/16 Rally Traxxas 1/16 Summit Traxxas 1...
View full details
Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4) Suspension pin set includes 2x46 mm (2) and 2x14 mm (4) suspension pins. Fits front or ...
View full details
Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2) Black differential output yokes (2) with 3x5 mm screws (2) and s...
View full details
This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.Includes: One 70 tooth gearFeatures: Tough nylon construction Drilled fo...
View full details
Steering bellcranks (L&R)/ draglink Left and right steering bellcranks with drag link
Battery expansion kit (allows for installation of taller multi-cell battery packs) (Rustler®, Bandit, Stampede®) The battery expansion kit allows ...
View full details
Suspension arms, left & right Replacement left & right suspension arms Replacement part for these models: BIGFOOT® No. 1 Officially Li...
View full details
Bulkhead (front) (black) Black composite front bulkhead Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica Bigfoot® O...
View full details
Traxxas Wheels, Method 105 1.0", (Black, Beadlock) (2)
*** if sold out order LOSB5971 **** Ball bearing, black rubber sealed (20x32x7mm) (2) Pair of 20x32x7 mm black rubber seal ball bearings. A ste...
View full details
Fenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ body mount/ 3x8 flat-head screws (4)/ 2.5x6 CS (10) Narr...
View full details
This is the Traxxas Transmission Cush Drive Elastomer Damper for the Traxxas X-Maxx. This system requires the Cush Input Shaft (TRA7786X). Includes...
View full details
TRA5117A Ball bearings, black rubber sealed (6x12x4mm) (2)
This is the rear bulkhead for use on the Traxxas 1/16 E-Revo and Slash vehicles.Features: Nylon construction that’s black in colorIncludes: Two Re...
View full details
Spur gear, 54-tooth (1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas...
View full details
Bottle, fuel filler (500cc) The fuel bottle holds 500 cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and...
View full details
Traxxas Shock Tower Front Features: Made from black molded nylon For the Traxxas Stampede Specs: Height: 2 3/4" Thickness: 1/4" Width at base: 2...
View full details
Screws, 3x23mm button-head machine (hex drive) (6) 3x23 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Traxxas Led Light Set, Complete (Includes Front And Rear Bumpers With Led Light Bar, Rear Led Harness, & Bec Y-Harness) (Fits 4WD Slash)
Traxxas Mounted Wheelie Bar Tires/Wheels Blue (2) Features: Machined blue aluminum ball bearing equipped wheels Rubber Tires Includes: Two rubbe...
View full details
Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768 or #7768R) Heavy-d...
View full details
Carburetor, complete (minus air filter assy.) (TRX® 2.5, 2.5R, 3.3 composite slide) The complete slide carburetor comes fully assembled and ready ...
View full details
This is a set of replacement Traxxas Differential And Transmission Yokes with Hardware , and are intended for use with the Traxxas 1/16 Slash, and ...
View full details
These are the front and rear center half shafts for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.Features: Nylon construction that’s black...
View full details
IF NOT IN STOCK REORDER RPM73162 OR RPM73165 OR RPM73164 OR RPM73169 These are the left and right axle carriers for use on the Traxxas 1/16 ...
View full details