TRA7731 Suspension arms, lower (left, front or rear) (1)
TRAXXAS
This is a replacement Traxxas X-Maxx Left Lower Suspension Arm. Features: Factory Replacement Part Nylon Construction Includes:(1) Left Lower Sus...
View full detailsThis is a replacement Traxxas X-Maxx Left Lower Suspension Arm. Features: Factory Replacement Part Nylon Construction Includes:(1) Left Lower Sus...
View full detailsSpur gear, 50-tooth 50-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full detailsScrews, 3x12mm countersunk machine (6) (hex drive) 3x12 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsCarriers, stub axle (rear) (2) Standard rear stub axle carriers (2) Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...
View full detailsThe Velineon® VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles. ...
View full detailsHigh-Intensity LED Light Kit for Maxx Monster Trucks Built Maxx© Tough! The Traxxas Maxx redefines speed, durability and toughness with its innova...
View full detailsBulkhead, rear (upper & lower), center differential (replacing #7727 & #7728 requires #5108 ball bearings (2)) Rear upper and lower X-Maxx...
View full detailsThis is a pack of two replacement LaTrax Oil Shocks with Springs. These shocks are factory assembled, and include a bottle of 20wt silicone shock o...
View full detailsSuspension arm set, front (includes upper right & left and lower right & left arms) Front suspension arm set includes upper right & le...
View full detailsFeatures:Steel constructionIncludes:One Differential Ring GearOne Differential Pinion GearRequires:Installation in differential assemblyTechnical S...
View full detailsThis is the Traxxas Splined 17mm Wheel Wrench.Features: Black colored Made of nylon Compatible with the 17mm splined nuts used on many Traxxas veh...
View full detailsThis is a bottle of Traxxas Differential Oil. This differential oil can be used for a variety of vehicle types. The thicker the oil, the less your ...
View full detailsThis is a set of 2 Traxxas 15x24x5mm Rubber Sealed Ball Bearings in Black.Features: Steel construction with black rubber seals Used as the outer b...
View full detailsRebuild kit, Velineon® 3500 (includes plastic endbell, 5x11x4mm ball bearings (2), 2.5x5mm BCS (with threadlock) (4), rear bushing) Rebuild kit f...
View full detailsScrews, 4x12mm countersunk machine (hex drive) (6) 4x12 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsThis is a Traxxas Steering Bellcranks/bellcrank Support/Servo Saver.Features: Molded composite plastic construction and Steel servo saver springInc...
View full detailsBody mounts (posts), front & rear Front and rear body mounts Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® T...
View full detailsTraxxas optional center differential kit for use on the 1/16 E-Revo and Slash Vehicles. Constructed of black nylon. The optional center differentia...
View full detailsThis is the propeller shaft and flex cable for the Traxxas Spartan.Features: Steel construction that is silver in colorIncludes: One propellor shaf...
View full detailsHeavy-Duty Chassis Brace Designed for the Extreme The heavy-duty chassis brace fits Slash 4X4 models equipped with the low-CG chassis and all R...
View full detailsThis is a set replacement rear upper and lower bulkheads intended for the Traxxas Maxx vehicle. Features:Factory Replacement Bulkheads Includes: (...
View full detailsThis is the chassis for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is grey in colorIncludes: One Chass...
View full detailsBody mounts, front & rear/ body mount posts, front & rear/ 2.5x18mm screw pins (4)/ 4x10mm BCS (1) Front and rear body mounts and body pos...
View full detailsIdler gear, steel (30-tooth) Replacement 30-tooth steel idler gear for the Magnum 272 transmission. Does not fit Magnum 272R transmission. Repla...
View full detailsScrews, 3x10mm countersunk machine (6) (hex drive) 3x10 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsTraxxas Premium Shock Oil (40 wt) Traxxas premium 40 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silicon...
View full detailsNuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the ...
View full detailsFEATURESSteel construction, white in colorDab of paint on end of spring indicates compression rateINCLUDESTwo Long 0.892 Blue Rate GTR Shock Spring...
View full detailsAir filter inserts, foam (3) (pre-oiled) (TRX® 2.5) Pack of three replacement pre-oiled air filter inserts for TRX® 2.5, 2.5R, and 3.3 engines. R...
View full detailsScrew pin set (Rustler®/ Bandit/ Stampede®) Suspension screw pin set Replacement part for these models: Bandit® BIGFOOT® No. 1 Officially Licens...
View full detailsBattery, Power Cell, 1800mAh (NiMH, 6-C flat, 7.2V) Traxxas Power Cell NiMH battery packs provide excellent “punch” at an affordable price. Low-res...
View full detailsWashers, 3x6mm metal (12) Pack of twelve 3x6 mm metal washers Replacement part for these models: Drag Slash 1967 Chevrolet® C10 Truck Drag Slash...
View full detailsGear set (for 2080 waterproof micro servo) Replacement gear set for standard 2080 micro servo. Does not fit 2080A or 2080X servos.
Traxxas Premium Shock Oil (60 wt) Traxxas premium 60 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silico...
View full detailsBall bearings, blue rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full detailsSpur gear, 54-tooth, steel (1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) has steel teeth for superior power handling and durability. ...
View full detailsSpur gear, 60-tooth 60-Tooth spur gear. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help ...
View full detailsThese are the rubber sealed ball bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD vehicles.Features: Blue rubber sealed May also be u...
View full detailsScrews, 2.5x8mm cap-head machine (6) Set of six 2.5x8 mm cap-head machine screws with hex-drive heads Replacement part for these models: 1/16 E-...
View full detailsScrews, 3x15mm countersunk machine (6) (hex drive)
Wheel hex clips (6) Set of six wheel hex clips Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®
These are the Traxxas Ball Bearings for the LaTrax Rally Car.Features: Silver/grey colored Made of Steel for a long life time Replaces all bushing...
View full detailsSlash 4X4 Low-CG (Low Center of Gravity) Conversion Kit Everything to convert your Slash 4X4 Performance-proven by the Slash 4X4 Ultimate and 1/1...
View full detailsScrews, 4x15mm countersunk machine (hex drive) (6)
This is a Traxxas 61-Tooth Spur Gear factory replacement for the 1/18 scale LaTrax Desert PreRunner and LaTrax Teton. Includes: 1 61 tooth spur gear
Hollow balls, steel (machined) (22) Increase precision and extend wear with this set of twenty fully machined steel hollow balls for 1/16 models. ...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
MISSISSAUGA LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS