TRA3636A Steering blocks, Rustler/Stampede/Bandit (2)
TRAXXAS
This is a set of two optional blue aluminum steering blocks with ball bearings from Traxxas. These steering blocks mount the the front uprights, an...
View full detailsThis is a set of two optional blue aluminum steering blocks with ball bearings from Traxxas. These steering blocks mount the the front uprights, an...
View full detailsShock shafts, steel, chrome finish (xx-long) (2) Replacement XX-long steel shock shafts with chrome finish for Traxxas Ultra Shocks (2). Replacem...
View full detailsScrews, 3x23mm button-head machine (hex drive) (6) 3x23 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsBulkhead (front) (black) Black composite front bulkhead Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica Bigfoot® O...
View full detailsTires & wheels, assembled, glued (black wheels, dual profile (2.8" outer, 3.6" inner), Sledgehammer® tires, foam inserts) (2) (17mm splined)...
View full detailsTRA3037 Battery, RX Power Pack (5-cell hump style, NiMH, 1200mAh)
This is a pair of Traxxas GTR Assembled XX-Long Shocks (Without Springs) in Green for the Slash 4x4 Ultimate. These shocks feature PTFE-coated bodi...
View full detailsTailgate protector/ 3x8mm flathead screw (4) The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added dur...
View full detailsThis is a set of replacement Traxxas Differential And Transmission Yokes with Hardware , and are intended for use with the Traxxas 1/16 Slash, and ...
View full detailsIF NOT IN STOCK REORDER RPM73162 OR RPM73165 OR RPM73164 OR RPM73169 These are the left and right axle carriers for use on the Traxxas 1/16 ...
View full detailsAir filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ Revo® air filter base (angled)/wire mount/hardware (1 each) (TRX® Eng...
View full detailsThis is a 28-tooth 48-pitch replacement pinion gear for the Traxxas 4-Tec.Features: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD ...
View full detailsBattery expansion kit (allows for installation of taller multi-cell battery packs) (Rustler®, Bandit, Stampede®) The battery expansion kit allows ...
View full detailsTurnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right) Upgrade your standard r...
View full detailsThis is a Traxxas Rock n' Roll body that is painted with decals applied for the X-Maxx vehicle. This body comes assembled with tailgate protector.
This Traxxas Stainless Screw Kits is 100% complete. Your new kit will include everything needed to do a full conversion on a TRX-4. Stainless Steel...
View full detailsTraxxas' TQi 2.4GHz 2-Channel Radio System boasts a full range of tuning features; long-range, 2-channel versatility, high-output, 2.4GHz signal, a...
View full detailsThis is a replacement Traxxas TQi 2.4Ghz 4-Channel Transmitter. The TQi transmitter is compatible with the Traxxas Link Wireless Module (TRA6511) t...
View full detailsTraxxas Mounted Wheelie Bar Tires/Wheels Blue (2) Features: Machined blue aluminum ball bearing equipped wheels Rubber Tires Includes: Two rubbe...
View full detailsTRA5117A Ball bearings, black rubber sealed (6x12x4mm) (2)
Features: Clear molded polycarbonate construction Trimmed out wheel arches and body post holes Includes: Latrax Teton Clear Body with Decal Sheet...
View full detailsThese are the front and rear center half shafts for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.Features: Nylon construction that’s black...
View full detailsMotor coupler, collet style/ GS 4x3 (with threadlock) (1)/ Wrench, 10mm (2) Collet-style motor coupler with 4x3 stainless grub screw with applied ...
View full detailsRod ends (12)/ hollow balls (12) Set of twelve rod ends come assembled with hollow balls Replacement part for these models: Drag Slash 1967 Chev...
View full detailsThis is a pack of replacement shock rebuild parts for the GTR shocks (either the stock ones or the hard anodized ones). Included are shock bladders...
View full detailsSuspension arms, left & right Replacement left & right suspension arms Replacement part for these models: BIGFOOT® No. 1 Officially Li...
View full detailsCaster blocks, 30-degree, red-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2) Red aluminum 30° caster blocks improve the a...
View full detailsSuspension arms (front) (2) Black front suspension arms (L&R) Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica ...
View full detailsTires & wheels, assembled, glued (2.8") (RXT black chrome wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric fro...
View full detailsBattery, Series 5 Power Cell, 5000mAh (NiMH, 7-C hump, 8.4V) Traxxas premium 5000-series Power Cell NiMH battery packs provide the highest capa...
View full detailsFenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ body mount/ 3x8 flat-head screws (4)/ 2.5x6 CS (10) Narr...
View full detailsTraxxas Cush Drive Housing. Package includes one front half and one rear half. Features:Nylon Construction Includes:(1) Front Half(1) Rear Half
O-ring and seal set, carburetor/ O-rings: 2x1mm (3), 10x1mm (4), 2.5x1.15mm (2), 6.2x1.2mm (1)/ 5x.9mm O-ring installation tool/ 5.3x7.8x.6mm crus...
View full detailsThis is the optional clear body for the Traxxas X-Maxx Monster Truck.Features: Molded from clear polycarbonate plastic Allows X-Maxx drivers to cr...
View full detailsThis is the front bulkhead for the Traxxas Slash 4x4.Features: Composite plastic construction that is black in color Fastens to front of chassis a...
View full detailsThis is the Traxxas Front/Rear Body Mount for the Slash 4x4.Features: Black colored For the Traxxas Slash 4x4 Hardened plastic construction Inclu...
View full detailsThis is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL.Features: Composite construction Allows installation of taller multi-cell ...
View full detailsThis is the motor and pinion gear for the Traxxas EZ Start 2 (R) System.Features: Pre-installed 10 tooth pinion gearIncludes: Motor and Pinion Gear...
View full detailsScrews, 3x15mm cap-head machine (hex drive) (6) 3x15 mm cap-head machine screws with hex drive heads. Set of six. Replacement part for these mode...
View full detailsTraxxas Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
This is a pair of Fully Assembled (without springs) Long Green-Anodized GTR Shocks from Traxxas. Features: Hard Anodized PTFE Aluminum Bodies T...
View full detailsThis is a Traxxas LED front bumper light bar for the TRX-4 sport body. Requires: TRA8028 Power Supply Accessory part for these models: TRX-4 1979 ...
View full detailsSpur gear, 45-tooth (32-pitch) 45-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing...
View full detailsNuts, 4mm flanged nylon locking (aluminum, pink anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are th...
View full detailsThis is the battery compartment door and vents for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black...
View full detailsThis is the input shaft for use on the Traxxas Slash 4x4 vehicles.Features: Steel construction that is black in colorIncludes: Input Shaft Bearing...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS